[bbuster]

Re: Whirlpool ADG 7460 flow meter problem

I had similar problem with my IGNIS 348 – same maker, the over the counter reed switch from MAPLINS didn’t do the job but the reed switch I order on line did, it was Maplins part number CL37 – I found it best to order 2 as they are very fragile – NEVER hold the glass and bend the lead – as I found out the glass gives way first! Hope that helps – bbuster..

[bbuster]

Re: IGNIS ADL 348 and similar WHIRLPOOL machines

Thanks for your quick response, but the problem is that there is no black switch on the base of the sump – no wires nothing! It’s a complete mystery. The machine has worked in the past – quite how is the mystery. When you uncover the program board the only connections are:
Mains power from the on/off switch.
Heater power
Main pump power
Empty pump power.
Salt dispenser solenoid
Water inlet valve.
Door switch
Wash powder door
Water inlet reed switch
Temperature sender
That’s it!
Any ideas greatfully accepted, bbuster..

[Author]

Posts