[billtec]

Re: Servis M6000-1W washing machine refuses to start

hi,had one of them machines in for repair ,was doing the same thing,relays clicking etc,so suspected motor,brushes were as new and all looked good,tested motor ,but no go ,so stripped it down,and found a fuseable link inside had gone o/c, found a spare to fit ,and machine started up ok ,and been ok since,hope this helps thanks.

[billtec]

Re: PARTS FOR RUSSEL HOBBS WASHING MACHINE,

HI JACKAL,LET ME KNOW AT browns62@hotmail.com CHEERS.

[billtec]

Re: PARTS FOR RUSSEL HOBBS WASHING MACHINE,

hi,thanks for quick reply,hard to believe a large brand name would sell poor products,from china,machine runs smooth,and it looks good ,shame to dump it ,by the way ,my service is to remove parts clean/check,belt/pump /brushs/ bearings/seals,etc.and replace if needed. will hang on to see if anyone can help.thanks.

[billtec]

Re: re lg direct drive washing machine,

re pcb board,have any of you ,got a good used board for this lg model,thanks

[billtec]

Re: re lg direct drive washing machine,

HI,THANKS FOR THAT,DID YOU HAVE TO DIG IT OUT OF THAT 4MM OF GEL STUFF!!.

[Author]

Posts