[blindman]

Re: Hotpoint CTD40P Not heating

Thanks for the reply iadom

Hope to get it sorted soon.

[blindman]

Re: Hotpoint CTD40P Not heating

iadom wrote:You have checked the stats for continuity first I assume.

There used to be three stats fitted, then they removed one in July 05 and then refitted it again in Jan 06.

According to the information I have the third or cycling stat was refitted after serial number 60109.00001 so yours should have three unless of course they have removed it again.

The kit will contain a one shot safety stat, a cycling stat and an NTC. If you only have two then you only need to replace the NTC and the safety stat.

Jim.

Thank you for the reply.

I will do a continuity check before ordering etc.

So if there were to be three stats then they’d all be in that back panel?

BTW
Both stats looked exactly the same with no dots or colours etc.

Are the replacements easy to tell apart?

[blindman]

Re: Whirlpool ADP 962 spray arms not turning:Water entering

Thank you for the reply.

I’ll be ‘going in’ (unplugged 8) ) at the weekend probably and will reply with findings.

Ta

[Author]

Posts