[bockersjv]

Re: Spare needed for Smeg a2 Oven

Thank you for your help, I’ll consider my options 😉 Was thinking about wiring it to the large oven light, that way it would run with that oven and could also be left on after the oven is no longer heating by just turning the control to interior light only.

I’ll see what I can rig up that would also be safe.

The rest of the Oven works well, which is quite surprising for a Smeg, so not keen on decommissioning yet.

Thanks again
John

[bockersjv]

Re: Spare needed for Smeg a2 Oven

Smeg have replied, being very helpful!!!

Hello
I am sorry but the part is no longer available with no alternative options. The oven was built around 1999 so most parts are now obsolete.

Regards
Smeg-Service Team
I would argue with them as other than that board every part is still available and the A2 design has changed little, but there seems little point. I don’t want to scrap what is otherwise a working cooker.

[bockersjv]

Re: Spare needed for Smeg a2 Oven

Thanks Kwatt, I have spoken with UK Whitegoods, who have been very helpful, they were aware of the board but that the part is no longer available. They seemed to think there may be a workaround.

I may have to contact Smeg for details but they will want their own engineer, with associated costs, to check it out and affect a fix.

Last resort would be to rig up a manual fan switch!

[bockersjv]

Re: Spare needed for Smeg a2 Oven

Yep sure of the model, I took a picture of the model plate

The part, which I am led to believe is obsolete is this control board:-

There is some decay to the resistor which may be the issue.

So can I get the part or is there a workaround?

Many thanks all.

[bockersjv]

Re: Spare needed for Smeg a2 Oven

Well that’s what I thought but there is no stat of this sort, and I have traced every wire. There are the two oven stats on each side but no separate cooling fan stat. The wires from the fan go to a small circuit board near the base of the cooker where the power lead enters. The leads from this board then go off to the two interior oven stats.

I bought part 818731036 THERMOSTAT TANGENTIAL 100°C ready to fit but cannot find it anywhere.

[bockersjv]

Re: Smeg A2 2da Cooling Fan Problems

Thanks Dave, going to have another go tonight. I will trace the fan wires this time.

[Author]

Posts