bornlivelife

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: Hotpoint Washer Dryer – Noisy #180117
    bornlivelife
    Participant

    Re: Zanussi Washer Dryer – Noisy

    Hello – im sorry its a Zanussi Jetsystem excel 1250

    WJS 1397W

    product 914639503

    type 6297753
    Serial no; 128 00390

    What pump would that need?

    bornlivelife
    Participant

    Re: Electrolux ESI 600 Blue Tubes – Sticky timer, no heat

    Yes the heater has a reading – circuit is ok – you think its the safety system at the inlet valve then?

    bornlivelife
    Participant

    Re: Electrolux ESI 600 Blue Tubes – Sticky timer, no heat

    Right item 3 is the thermostat Im sure about it! But from circuit check I think its working

    So I think I need a new timer because everything I check seems to be ok. What do you think?

    bornlivelife
    Participant

    Re: Electrolux ESI 600 Blue Tubes – Sticky timer, no heat

    Found some more things:

    1. Door open/ close circuit : works fine

    2. At bottom of a water chamber – White thing dia 20 with 2 wires – CIRCUIT OK

    3. Next to heater a black thing with lots of wires: orange (2 wires) in, orange (1 wire) out; purple (1 wire) in, purple (1 wire) out

    All circuits give a reading which sounds odd

    ORANGE a/ ORANGE b : CIRCUIT OK
    ORANGE a /PURPLE b : CIRCUIT OK
    ORANGE a/ pURPLE a : CIRCUIT OK
    PURPLE a/ PURPLE b : CIRUIT OK

    Is this the thermostat, and should it be reading that?

    bornlivelife
    Participant

    Re: Electrolux ESI 600 Blue Tubes – Sticky timer, no heat

    Hmm this is quite tricky ! I already contacted someone through that link so hopefully someone will get to me on Monday – thermostat must be in the electric panel then near the on/off switch…

    bornlivelife
    Participant

    Re: Electrolux ESI 600 Blue Tubes – Sticky timer, no heat

    Hello

    Ive checked something that could be a thermostat, its round and about 50mm diameter plastic made by KEMA EUR and has numbers ( 05/99 761143 , 0611 60/27 on it) It has a breather tube coming out of it and 3 connections red (2 wires) black (1 wire) grey (1 wire). Circuit seems a bit weird, it does the following:

    RED-BLACK : NO CIRCUIT
    RED-GREY : NO CIRCUIT
    GREY-BLACK : CIRCUIT

    Does that mean its working or broken, and is this the thermostat please?

    in reply to: Electrolux ESI 600 Blue Tubes – Sticky timer, no heat #179994
    bornlivelife
    Participant

    Re: Electrolux ESI 600 Blue Tubes – Sticky timer, no heat

    Thank you – you’re very kind – will have a look then see what parts I need to buy

Viewing 7 posts - 1 through 7 (of 7 total)