[Bramley]

Re: Zanussi ZWD1427OW washer/dryer

Just to say ..you were both correct .. it was the dryer element .. thanks again …. all fixed!!

[Bramley]

Re: Zanussi ZWD1427OW washer/dryer

Thanks CC1 and Martin for you help. That makes sense as the dryer has only been used about a dozen times and hasn’t been used at all in the last five years. Tried again today but it started then stopped within a couple of seconds. Thanks again both for the information I’ll get the engineer back out now that it has completely conked …. I suppose it’s like everything else …. use it or lose it!!…. have to do more washing in the future.

[Bramley]

Re: Zanussi ZWD1427OW washer/dryer

Thankyou for replying. He didn’t check anything Martin, he was in the house about 5 mins. I was so shocked that the program started, I thought I must be going senile. Can the pump work intermittently before it finally goes because I managed a wash this morning? I’ll try it again in the morning I might just be lucky, I’ll try it on a hotter wash to see if the heater works.

[Bramley]

Re: Hotpoint Washer/Dryer BWD129 1200spin

Thanks Penguin … I’m assuming as Indesit and Hotpoint are now one, that you mean the WIL 153 and the BWD 129 are the same construction.

Sounds as though we’d better get plenty of plasters and bandages in before we start.

Fay … what happened to replacing bearings without having to remove the drum?

[Bramley]

Re: Drum bearings on WDM 130 01 Hoover

Thanks Penquin ….. that’s what he was afraid of ……. never mind…….another all day job…..

Thanks again
Bramley

[Bramley]

Re: Drum bearings on WDM 130 01 Hoover

helo….. he is trying to explain to me …. that all he wants to know is … how to get the spindle out with the bearing on ….. does he need a hammer drawer? (if that’s how you spell it).

Bramley

[Bramley]

Re: Drum bearings on WDM 130 01 Hoover

Thanks for replying helo ….. he’s now got the back off the machine and the pulley wheel off…….

Bramley

[Author]

Posts