[briathlon]

Re: AEG 72630

Thanks Chris, very much appreciated.

[briathlon]

Re: AEG 72630

hi Chris

I have updated my profile with my email address now.

thanks
Brian

[briathlon]

Re: AEG 72630

Hi Chris
Was it my actual email address that you sent the file to, it’s just that if it was I have just updated my email address to my new one, I forgot that I had changed it. Cheers.

Brian

[briathlon]

Re: hotpoint WMA44N

Hi all
just thought i’d give you an update on the above, went back to it today armed with a new pcb, I had already meggered the machine which was ok, however when I arrived I put it through the last error detected test which didnt show anything useful, only a “start button pressed with door open” error, so before I fitted the new pcb I decided to try reprogramming the old pcb and after putting it through the programming sequence it worked perfectly ok 😀 so after thouroughly testing it and everything being ok I have left the customer to try it for a week to see if it carrys on working ok, fingers crossed. Once again thanks to all for taking the time to reply to me, cheers guys.

Brian

[briathlon]

Re: hotpoint WMA44N

thanks for your reply guys, it was a brand new motor i had in stock
that i tried in it and the wiring checked ok so that was making me discount a tacho fault. it doesnt have a control for variable spin speed (I wish it was that easy for me). I will try your suggestion about the last error code jim, i’ll let you know how I get on, thanks guys.

Brian

[briathlon]

Re: hotpoint WMA44N

thanks for the quick reply jim. I haven’t put it through the last error test but I will make that my next step. I should have said that I have checked the wiring from the motor as well.

Brian

[briathlon]

Re: zanussi fjs1225w 914512720/00

yip brushes it was. thanks very much for your input guys.

cheers
brian

[briathlon]

Re: zanussi fjs1225w 914512720/00

thanks for the quick reply helo, i will check that out tomorrow.

cheers
brian

[briathlon]

Re: lincat

cheers chris, was thinking that i would have to goto lincat directly.

thanks
brian

[briathlon]

Re: creda c362ew

thanks very much for the quick reply jj.

i’ll get a new stat ordered then.

regards
Brian

[briathlon]

Re: miele w723

thanks very much baron, i passed on the information you gave me to a local engineer that my son called out and you were 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} correct, the capacitor cured the fault 😀 dont know if you read these forums alan but if you do thanks for doing the job and charging a very reasonable rate.

regards
Brian

[briathlon]

Re: miele w723

thanks very much for that baron, i will also give that a try.

regards
brian

[briathlon]

Re: miele w723

thanks for the reply andill, i will try and find out if that capacitor is there, i’ll get back to you asap.

thanks
brian

[briathlon]

Re: zanussi wjd1257w problem

checked out the NTC thermistor today and it’s faulty, reading 166K as opposed to 5.7K – 6.3K. A new one solved the problem.

[briathlon]

Re: zanussi wjd1257w problem

thanks very much for that chris. the machine doesn’t give an error during the normal drying cycle, however when i put it through it’s test sequence it stops during the drying test cycle and throws up an E72 error code (NTC on drying condenser faulty) so i will look into that tomorrow, thanks again chris.

Brian

[Author]

Posts