[brimble]

Re: bosch WAE244S0GB/ 15 washing machine not draining

Thanks guys,

Update…. The final one…… I found the blockage…… A pair of my wifes bloody pants in the sump drain!!! :rolls: how the hell do a pair of pants get in the drain?

Thanks again, and i now have a spare pump for if/when it does fail:)

Cheers,
Bryn

[brimble]

Re: bosch WAE244S0GB/ 15 washing machine not draining

Hmm, i still have an issue. I have a strange light flashing on the front panel which should be the light on the left as shown in the picture, this hasn’t flashed before and there is no reference to it in the manual. Theres also a f18 flashing code, which i believe is a blocked pipe or pump, i had checked the pipes first and now replaced the pump. I guess the pump can be confirmed as ok. So am i correct in believing the problem must lie with a blockage?

Thanks,
Bryn

[brimble]

Re: bosch WAE244S0GB/ 15 washing machine not draining

thanks lee8. I did post a thankyou yesterday but it didn’t seem to work… anyway, I ordered the part from here and it came this morning, so great service there thanks. I fitted it a short while ago and now have a load in the washing machine. It immediately sounded better, so on initial impressions, it appears that the pump was indeed rodgered.
cheers,
bryn

[brimble]

Re: hotpoint aquarius ctd00 problem

thanks washtronics, i don’t suppose you know where this rogue capacity will be do you?? thanks again.
bryn

[brimble]

Re: indesit w133s won’t start program

thanks for the fast reply iadom, i have just been to check the brushes and they do seem to be quite worn but are still making contact witht the motor commutator. what does this sound like to you?

cheers,
bryn

[brimble]

Re: hotpoint aquarius ctd00 tumble drier broken 🙁

unfortunatly the ukwhitegoods shop doesn’t have this piece available and google doesn’t bring too much up either, any ideas anywhere else?

cheers,
bryn

[brimble]

Re: hotpoint aquarius ctd00 tumble drier broken 🙁

iadom. you are a star!!! the door pin appears to have disappeared but when tsted as per your last post. the drier works. i have now sent an email to the shop.

thanks again,
bryn

[brimble]

Re: hotpoint aquarius ctd00 tumble drier broken 🙁

thanks iadom.however, there is definitely only one hole on the door, in the centre at the top about 7mm diameter?? does it fit here? there are no wires for a microswitch to plug into. any ideas?

thanks again,
bryn

[brimble]

Re: electrolux aquarius ctd00 tumble drier broken 🙁

oops 😆 well spotted iadom. i better change the thread title. it is indeed a hotpoint. i definitely can see no pin though??

cheers,
bryn

[brimble]

Re: which single oven, hob,hood & microwave grill to bu

hi don. thanks for your help. i have now purchased the items in my list, from appliance-world. all in and looking great. i’ll have to reat myself to some of the stainless cleaner.

thanks again,
bryn

[brimble]

Re: which single oven, hob,hood & microwave grill to bu

thanks don, great stuff. i have been having a look too and these have caught my eye. neff:

t1322n0gb hob
b1422nogb oven
h5474nogb microwave
s54e53x1gb dishwasher
and a cheap hood, like this one baumatic f60-2ss
thanks, bryn

[brimble]

Re: which single oven, hob,hood & microwave grill to bu

thanks don. i have also been shown some fagor gear & the shop seemed to rave about them, but i’m not sure, i’ve never heard of them.

there is a slight update too.

the microwave is to be fitted

the oven needs to be able to be supplied by a 13 amp power supply but nowhere seems to state what supply the appliances use.

i’d like a chimney style extractor.

are the induction hobs any good?

i’m also after an integrated dishwasher

i’d like the hob, oven, & microwave to be matching (not too concerned with the dishwasher and hood though.

my budget is £1400 maximum.

any specific suggestions with this criteria?

thanks in advance

[brimble]

Re: tumble dryer tripping consumer unit

well folks. just a quick update. i was going to have a look at the offending appliance again last night and thought i’d try it beforehand, lo and behold it worked. does this indicate a damp element?

thanks again.
bryn

[brimble]

Re: tumble dryer tripping consumer unit

thanks for the reply mate. i have tried removing the banjo jobbie and all appears dry inside there, so the search continues.

what exactly causes the tripping? could it be a fuse? i haven’t tried that yet? could it be a short somewhere and how could i test it?

thanks again.
bryn

[Author]

Posts