Forum Replies Created
-
Posts
-
Re: Zanussi ZWF14280S
No recorded fault code as I cleared it a few weeks ago, then it was only showing door open.
Re: Zanussi ZWF14280S
I’ve been out to this machine today, the pump is ok and there is no blockage. Left machine on test and went back about an hour later, machine only had 9 mins left to run. At 6 mins it pumped out water and at 5 mins it started last rinse, didn’t start spin until only 1 min was left, only did a short spin then stopped, the door didn’t unlock and the time in the window went back to the start of the program and the green start button flashed. All this took about 25-30 mins. No recorded fault code as I cleared it a few weeks ago, then it was only showing door open. Any help on this would be great.
ThanksRe: Whirlpool T/L 3RLSQ8000JQ1 HELP!!
One new cap, three s/hand caps, one s/hand motor and one s/hand gearbox. New timer on order.
There own motor and gearbox will be refitted with new timer. Will only charge when machine is ok and only for parts needed.Re: Whirlpool T/L 3RLSQ8000JQ1 HELP!!
Called back to machine yesterday (Monday), same fault. Going to order timer today.
Will let you know what happens next.Re: Whirlpool T/L 3RLSQ8000JQ1 HELP!!
Changed cap yesterday, sat and watched machine for over three hours, worked fine!
Can’t see how it could be the timer as the live to the cap goes through the switch on the motor that is open when the motor is running.
Changed gearbox, think this could be the only cause.
Will let you know after weekend if I get a callback or not.
Thanks for your help
Re: Whirlpool T/L 3RLSQ8000JQ1 HELP!!
Thanks, think i’ll have to change the cap again then sit and watch it for a few hours to see whats going on.
