CARLJONESDAR

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 35 total)
1 2 3
  • Author
    Posts
  • May 1, 2018 at 10:12 am in reply to: Clear error e21 #455660
    CARLJONESDAR
    Participant

    Re: Clear error e21

    Sorted now thanks, it was different, from 12 o’clock press and hold start button and turn left one click, release start button and turn off. Thats it.

    March 6, 2016 at 10:00 pm in reply to: Whirlpool washing machine #436046
    CARLJONESDAR
    Participant

    Re: Whirlpool washing machine

    Could this be an NTC fault??

    Just been reading up on whirlpool faults and found a post saying whirlpool washer no power could be NTC fault.

    Any help would be appreciated.

    January 5, 2016 at 8:14 pm in reply to: Secure My Goods Ltd #432111
    CARLJONESDAR
    Participant

    Re: Secure My Goods Ltd

    CARLJONESDAR wrote:I did a job for them last week, sent them an invoice be email. Will post again when paid.


    They paid in full with no problems within 4 – 5 weeks. 🙂

    November 4, 2015 at 11:58 pm in reply to: Secure My Goods Ltd #432110
    CARLJONESDAR
    Participant

    Re: Secure My Goods Ltd

    I did a job for them last week, sent them an invoice be email. Will post again when paid.

    October 11, 2014 at 5:37 pm in reply to: Duel fuel cooker repairs #420282
    CARLJONESDAR
    Participant

    Re: Duel fuel cooker repairs

    Thanks for all your feedback. Have emailed customer with info from previous post and the phone number of Gas Safe for them to check.

    Carl

    October 11, 2014 at 2:01 pm in reply to: Duel fuel cooker repairs #420279
    CARLJONESDAR
    Participant

    Re: Duel fuel cooker repairs

    Thanks for the quick responce lee8. Do you know where I can download a copy of that reg to pass on to a customer. Would be a great help. Thanks

    May 28, 2014 at 8:22 pm in reply to: Bosch new format SBV50E10 wierdness – wont work unless you.. #406020
    CARLJONESDAR
    Participant

    Re: Bosch new format SBV50E10 wierdness – wont work unless y

    I have the same problem on the same model. Did the new pump fix the problem?

    September 20, 2013 at 11:36 am in reply to: Hotpoint fridge freezer module #401451
    CARLJONESDAR
    Participant

    Re: Hotpoint fridge freezer module

    Thanks for that but can you or anyone give a bit more infomation. I have found the adapter on connect and will orded one but any more info would be great.

    Thanks

    October 25, 2012 at 1:08 pm in reply to: zanussi TEC 7276W E90 #383639
    CARLJONESDAR
    Participant

    Re: zanussi TEC 7276W E90

    Yes it is TCE7276W. Email is cjrepairs@btconnect.com
    Thanks

    January 25, 2012 at 3:23 pm in reply to: LG dryer bE #367829
    CARLJONESDAR
    Participant

    Re: LG dryer bE

    It’s ok, I just found it, It’s belt.

    July 4, 2011 at 8:17 am in reply to: Hotpoint WML540 #354589
    CARLJONESDAR
    Participant

    Re: Hotpoint WML540

    Thanks, will send to EMW.

    August 31, 2010 at 12:49 pm in reply to: Candy C1041 washing machine #328918
    CARLJONESDAR
    Participant

    Re: Candy C1041 washing machine

    Yes I’m sure but thanks.

    August 31, 2010 at 9:34 am in reply to: Candy C1041 washing machine #328916
    CARLJONESDAR
    Participant

    Re: Candy C1041 washing machine

    Ok, I’v found this old post.

    http://www.ukwhitegoods.co.uk/modules.p … +delay+mod

    Does anyone know what the mod is?

    Thanks for any info.

    August 26, 2010 at 4:50 pm in reply to: Candy C1041 washing machine #328915
    CARLJONESDAR
    Participant

    Re: Candy C1041 washing machine

    There are two machines, same model, one needed a new delay switch, ordered and then fitted new switch, when tested machine would fill and wash ok but would not spin. Removed switch from other machine after test to check spinning and fitted to first machine, first machine now works ok, fitted new switch to machine two and found it would not spin!!! Faulty switch maybe??? Ordered another switch, fitted to machine one and two with same result.

    Machine one and two spin with original switch but won’t when new switch is fitted.

    Anyone got any ideas?

    Thanks

    April 8, 2010 at 5:07 pm in reply to: Zanussi ZWF14280S #317226
    CARLJONESDAR
    Participant

    Re: Zanussi ZWF14280S

    Heater tests ok. Only tested the motor for earth and continuity. Have just downloaded the full service manual from connect. Will be going back to job next week to have another look. If anyone has any ideas befor i go back it would be great. Thanks

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 35 total)
1 2 3