[ccroll]

Re: Hotpoint Tool Case 19

new hotpoint/whirlpool engineers are now issued a Stanley 195611 Fatmax Tool Backpack & a Stanley 1-95-613 23-inch Metal/ Plastic Toolbox – Yellow

[ccroll]

Re: Whirlpool to do a recall on Hotpoint dryers

it’s all dryers produced in the yates plant since 2004

[ccroll]

Re: Hotpoint dryer belt fitting tool

A1engineer wrote:i do this a different way and find it really easy and quick, take the front fan off and remove the pulley bolt nearest you, loosen the other pulley bolt and disengage the hook of the pulley from the motor, push the wheel all the way round away from you using the bolt left in place as a pivot, then put belt in place and pull wheel back towards you once its lined up with motor you can hook it back in place an refit the 2nd bolt, tighten both and jobs done, i can fit these belts with this method in less than 10 minutes 🙂

the unoffical hotpoint/indesit way, but we still have to spend 40 minutes on the call

[ccroll]

Re: Bosch wvd2452sgb/03 pcb Fault?

thanks for the info dave will check that out

[ccroll]

Re: Domestic Appliance Testing

Thanks bob 8)

[ccroll]

Re: Domestic Appliance Testing

Hi Martin could you please send me the info thanks

[Author]

Posts