clarkparf

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 28, 2010 at 5:31 pm in reply to: Zanussi Main oven no heat but some on boost setting #324032
    clarkparf
    Participant

    I agree it is probably therefore the main fan element. I think the part is ELE4079 – AS 3116448006 / ELE4001.

    Does anyone know if replacement can be made without taking the built under oven out? If it can’t be fixed from the front I will probably need an engineer (tewkesbury, Glos) any suggestions on cost i should expect to pay. I exepct there is a link to find engineer elsewhere on this site but any help appreciated.

    April 9, 2006 at 12:56 pm in reply to: Hoover HCA450FK Freezer Not Cold Enough #169783
    clarkparf
    Participant

    Re: Hoover HCA450FK Freezer Not Cold Enough

    Eventually tried a defrost (12hrs). After powering back up seems same as before. it’s been on “super” for best part of 12 hrs – so fridge is currently colder than needed but freezer still not quite cold enough. just about freezes stuff in bottom 2 trays but top one not cold enough. Any further ideas please – or if engineer needed, any recommended for tewkesbury, Glos GL20. Thanks.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)