Craigd

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • in reply to: Zanussi ZWF1640W Drum will not turn #262495
    Craigd
    Participant

    Re: Zanussi ZWF1640W Drum will not turn

    Had it on its side messed about with the brush’s clean the comm and it started working again.

    I will replace the brushes as soon as posible but what size socket will i need to get the holders off as i could only get one screw out and the others are starting to round.

    thanks for your help so far

    Craig

    in reply to: Zanussi ZWF1640W Drum will not turn #262491
    Craigd
    Participant

    Re: Zanussi ZWF1640W Drum will not turn

    which is the best way to get access (lie it on its side etc)

    in reply to: Zanussi ZWF1640W Drum will not turn #262489
    Craigd
    Participant

    Re: Zanussi ZWF1640W Drum will not turn

    Are they easy to get to, and do they usualy just go, i would have thought that by rotaing the drum by hand it would also move the armature.

    in reply to: Samsung SR-S2028CVW side by side fridge freezer failing #251917
    Craigd
    Participant

    Re: Samsung SR-S2028CVW side by side fridge freezer failing

    Sorry for the delay, to replace the chiller tank.
    1. remove the plactic panel on the bottom of the fridge/freezer and disconnect from the connector (keep the insert you need it for the neew one.
    2. remove the panel from the rear.
    3. Cut the plastic pipes inside the fridge.
    4. Push some electrical cable throught the pipes untill it apears in side the fridge push the new pipe onto the wire and push the pipe insde the fride and gently pull from the front.
    4. for the rear do the same, you may have to unclip the compresor fan to make it easy.
    5. don’t forget to disconnect from the mains.

    Craigd
    Participant

    I also have a problem with the panel icing up which also split the the water tank, i have replaced it (£50) but the new one iced up after a week so i have now removed it until i sort out the icing disconnected the chilled water solenoid so can still use the ice maker

    in reply to: Samsung 2028 Water Tank replacement #253943
    Craigd
    Participant

    Re: Samsung 2028 Water Tank replacement

    Unpluging it is easy……. how to you feed the pipe through the front panel and get it to appear inside the fridge when there about 12 inches of in accessable void and a 90 degree turn.

    in reply to: Samsung 2028 Water Tank replacement #253941
    Craigd
    Participant

    Re: Samsung 2028 Water Tank replacement

    Okey, i’ve had the back panel off ond can see the pipe were it goes into the fridge… not a problem. The pipe to the front connection has me confused, i have take the plastic cover of the bottom ond can see the quick fit connection, but how do you get the pipe into the fridge, it goes through the metal and i cannot see how this metal cover comes off.

    help please.

    Cheers
    craig

    in reply to: Samsung 2028 Water Tank replacement #253939
    Craigd
    Participant

    Re: Samsung 2028 Water Tank replacement

    thanks Brian, i’ll try it tommorrow.

Viewing 8 posts - 1 through 8 (of 8 total)