Forum Replies Created
-
Posts
-
Re: crosslee drier
It’s more likely one half of the element has failed to be honest.
Good dryers these were 🙂
You can see the element here:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=574
Power off before proceeding :zap:
Dave.
Re: bottom element for hygena
That’s odd, the MFI disk says it’s a single in that model.
RR1409 is the one then 😀
Dave.
Re: bottom element for hygena
358295 Tell 🙂
It’s the Gorenje one, widely available as a pattern spare
RR1407 from Masterpart for instance 😉
Dave.
Re: Hotpoint FDW60
It has a bit 100 PCB, error codes are half way down on this page:
http://www.ukwhitegoods.co.uk/modules.p … c&start=15
Dave.
Re: part no. prices
He does sometimes but it may get missed, he is online now though he just answered another post 😆
Dave.
Re: Creda Condensing dRYER T 632 CW
Have a read of this thread which is basically the same dryer with a different badge:
http://www.ukwhitegoods.co.uk/modules.p … pic&t=9634
🙂
Dave.
Re: part no. prices
That’s a Masterpart part number, no price on their site, I guess this was directed at Andy from there ?
You’d be better off asking them directly as I doubt he’ll read this to be honest.
Dave.
Re: REDUNDANCIES AT COMET
Nothing to do with this then ?
http://www.ukwhitegoods.co.uk/modules.p … e&sid=1559
😉
Dave.
Re: Candy CIC60 Reverse Action Tumble Dryer
Yes, it comes with the thermostat and thermal fuse (no diode ;)) the thermal fuse has been replaced now also to improve reliability.
Dave.
Re: Ariston ADL120FR Washing mach bearing kit-determining mo
fatphil wrote:Is one absolutely necessary to do the job
Not really no, in fact you’d not need one at all for this job 😉
Dave.
Re: Anguis in herba
That’s weird, on the scroller it gets translated (using Firefox anyway) 😕
Dave.
Re: Candy CIC60 Reverse Action Tumble Dryer
She may not reply ronst given the time that has elapsed but replacing the heater will cure no heat 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time on these models 🙂
Dave.
Re: Ariston ADL120FR Washing mach bearing kit-determining mo
I would strip it down before ordering to be honest unless you don’t mind paying carriage both ways of course.
But yes, you can return unopened 🙂
Dave.
Re: Signatures
gegsy wrote:While we here did I do right in approaching the too much info to gen public ok?
Yep, spot on IMO 😀
