Forum Replies Created
-
Posts
-
Re: John Hopwood
kheath wrote:What you think?
Indeed, sorry, wasn’t thinking straight.
Yep another forum is required for ISE board and employees in that case.
Dave.
Re: Belling IDW603 Dishwasher
I used the part number from the other thread on this model for the door hinge straps, then checked all the Servis models that that fitted, then checked the part number of the heater for each of those and eventually narrowed it down to that one 😀
Dave.
Re: Partfinder DVD
Legally yes Mark, in effect you are only buying one license for your £65. the additional £5 only allows an extra terminal to access the £65 worth of goods as it were 😉
Personally I haven’t tried to validate another stand alone install where only the extra terminal fee has been paid to see if it works or not :duck:
Dave.
Re: Customer Retention
Just as a note on this and please don’t take it as a negative comment but please be aware of the data protection act.
If you use customer information stored on a database for “marketing” purposes you need a license to do so.
But yes, it can be a good means of effective customer retention.
Dave.
Re: Samsung B1245 Smartwash 6.0KG
It simply won’t, with a 6kg drum size it needs to be as good as a full size wash load every time to spin without being “unbalanced” I’m afraid.
Korean electronics 😉
Dave.
Re: Hotpoint TDL11P Ser.no. 90101556 Felt bearing probs
Duct and drum kit only I’m afraid, part number 1702495 which as WVM says, includes modified front duct unit to take bearing pads etc.
Dave.
Re: Samsung B1245 Smartwash 6.0KG
There isn’t one as such, it works by pulses sent from the motor tachometer to the control PCB.
If the motor speed varies too much in the pre-spin “distribution” tumble it won’t allow the machine to spin.
Have a read of this and the article link within:
http://www.ukwhitegoods.co.uk/modules.p … opic&t=813
So you can’t disable it if that was the plan ? 😀
Dave.
Re: Belling IDW603 Dishwasher
This one has been getting on my gloves and mits 😉
Check Servis part number 720366100 on Connect’s site (picture) is that the one ?
Dave.
Re: hotpoint condenser dryer ctdoop
I’d be more inclined to suspect the timer to be honest, does it continually rotate or does it just “stop” when it’s meant to reverse ?
Dave.
