Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: Whirlpool Microwave F05
Thanks both,
Don, those codes don’t relate to this particular model, I found those and they seem to be for US microwaves and smart gas cookers.
The magnetron looks and reads fine and no cracks.
Guess I’ll bite the bullet and go for the board 1st and see what happens but I would be interested to know what F05 does actually mean as I can’t find anything specific anywhere 😕
Cheers
Dave
August 15, 2016 at 3:07 pm in reply to: NEFF: U1661NOGB/02 FD 8201 Oven Door not shutting tight #439834Dave_Conway
ParticipantRe: NEFF: U1661NOGB/02 FD 8201 Oven Door not shutting tight
😀 Thanks
August 15, 2016 at 2:22 pm in reply to: NEFF: U1661NOGB/02 FD 8201 Oven Door not shutting tight #439832Dave_Conway
ParticipantRe: NEFF: U1661NOGB/02 FD 8201 Oven Door not shutting tight
Hi Tony,
On your version the hinges are different, you need one of each of 481568 and 267845:
https://shop.ukwhitegoods.co.uk/481568-oven-door-hinge
https://shop.ukwhitegoods.co.uk/267845-oven-door-hinge
Dave
Dave_Conway
ParticipantRe: Liebherr CS-2062 Freezer Alarm Problem
Service number is 092416506 :innocent:
Dave_Conway
ParticipantRe: Bosch Classixx Dishwasher
Switch it on empty and stand nearby and listen if there is a change of “tone” as the spray arms turn.
There is a motorised valve that directs the water between the upper and lower baskets during the cycle and when it changes every few minutes it can be distinctly heard, if it stays the same for more than 10 minutes that will be where the problem lies I would imagine.
Dave
Dave_Conway
ParticipantRe: September 2015 meeting
SAMURI wrote:And as Geoff said you can’t have your cake and eat it. 😀
Yes, but he did 😆
Dave_Conway
ParticipantRe: Spares for Daewoo dishwasher
It is now yes 🙁
Tried all our sources and got a final reply today, no hope at all I’m afraid.
Dave
Dave_Conway
ParticipantRe: Spares for Daewoo dishwasher
I can’t find any trace of a message arriving :/
Which model was it and I’ll reply here ? 🙂
Dave
Dave_Conway
ParticipantRe: September 2015 meeting
All booked :tup:
Dave_Conway
ParticipantRe: September 2015 meeting
Is there a few going Thursday night as normal before I book ?
And no discount code, I have to speak to a human ? 😆
Dave_Conway
ParticipantRe: ISE 5-2 Vestel door seal
Yep, some Amica are Vestel, Jim what is the full model of it etc from the rating plate ?
I can check it on Vestel’s parts website 🙂
Dave_Conway
ParticipantRe: ISE 5-2 Vestel door seal
It’s probably the same one used on some Vestel made Amica models, Ken what is the part number or the full ISE product code. I don’t have the tech info on that one, only the standard 2 ?
Dave
Dave_Conway
ParticipantRe: C00201310 TORX SCREW M8 Hotpoint
C00201310 from Qualtex are 65p each…
C00146483 is the 30 pack
HTH
Dave
Dave_Conway
ParticipantRe: Hotpoint WMFG611 F05
Thought so, thanks Tim 😀
Dave
Dave_Conway
ParticipantRe: Fan oven element – difference in prices?
Being cancelled now for you 🙂
-
AuthorPosts
