Dave_Conway

Forum Replies Created

Viewing 15 posts - 391 through 405 (of 12,426 total)
  • Author
    Posts
  • in reply to: belling format 600x module #204920
    Dave_Conway
    Participant

    Re: belling format 600x module

    Probably just the module (obsolete :()

    The neon is normally connected to the same terminal as the element on the stat so the oven wouldn’t work correctly if the stat was faulty I doubt.

    QER may have stock of these, I doubt they’ll be able to repair the faulty one if it’s blown to bits 馃檪

    Dave.

    in reply to: Small Claims on-line service. #204911
    Dave_Conway
    Participant

    Re: Small Claims on-line service.

    This guy is though – CHITOLE, Dick Lucien – 27 July 2004

    Dick Chitole eh 馃槸 馃槅

    in reply to: Hoover HND 315 80 D/Washer….? #204437
    Dave_Conway
    Participant

    Re: Hoover HND 315 80 D/Washer….?

    Try a reset:

    路 Open the door of the dishwasher.
    路 Push and hold the button of the current washing cycle, for 3 seconds.
    路 All program’s LEDs will flash simultaneously (RAPID 32′ excluded).
    路 Close the door of the dishwasher and wait for the end of the phase of drain.
    路 Re-open the door of the dishwasher.
    路 Now, the LED of the “favorite” washing cycle is flashing. You can confirm it,
    choose a different one or switch OFF the machine.

    I’ve emailed some tech info as well that should be helpful 馃檪

    Dave.

    in reply to: white knight part no #204880
    Dave_Conway
    Participant

    Re: white knight part no

    You won’t, it’s the commercial number, it will be CL??? 馃槈

    Dave.

    in reply to: creda stats #204811
    Dave_Conway
    Participant

    Re: creda ststs

    iadom wrote:There may be stats available but only the Indesit chaps may know those part numbers.

    Aha 馃檪

    Stat kit is 1703037

    Dave.

    in reply to: Neff f/oven motor #204889
    Dave_Conway
    Participant

    Re: Neff f/oven motor

    14-NF-28 in stock at Maddocks but it’s not much cheaper than the original for some reason 馃槙

    Dave.

    in reply to: white knight part no #204878
    Dave_Conway
    Participant

    Re: white knight part no

    Incorrect model number agro 馃槈

    All White Knight models start with CL and have three numbers after it 馃檪

    Dave.

    in reply to: creda stats #204809
    Dave_Conway
    Participant

    Re: creda ststs

    Best phone Hotpoint in that case, it’s not on the latest copy of Partfinder 馃檨

    Dave.

    in reply to: “Ooooh Matron” ? #165060
    Dave_Conway
    Participant

    Re: Refraction – the bending of light.

    Young Kenneth can explain that one, I’m off to bed 馃榾

    in reply to: “Ooooh Matron” ? #165057
    Dave_Conway
    Participant

    Re: Refraction – the bending of light.

    If the Indies want to advertise themselves I personally have no issue at all with it TBH, that’s what the site is about ATEOTD 8)

    Dave.

    in reply to: “Ooooh Matron” ? #165054
    Dave_Conway
    Participant

    Re: Refraction – the bending of light.

    gegsy wrote:Is that allowed

    Yes 馃榾

    in reply to: “Ooooh Matron” ? #165053
    Dave_Conway
    Participant

    Re: Refraction – the bending of light.

    Bugger me 馃槸

    It was 馃槅

    Total idiot that expected trade access with no way of verifying:

    twat wrote:Kenneth, why didn’t you say in the first place that you wanted Ids, badges, employment history and so on, Or even better on the site its self what you need to verify a person is in the trade, before getting people to jump through hoops. When you first emailed me yesterday you asked me to send a couple copy’s of invoices, this is what I did, In fact I sent 3!. The invoices show my company name and showed I paid by credit card invoiced to Aqua laundry. Surely you don’t think I have merely spent the little time I have in making up spurious companies.

    Some of the replies posted to questions on the board where clearly written by people who have trade clearance, as they say they themselves they “cant give out sensitive information”! this I what I was referring to.

    I’m bound to say it seems like whitegoods is running a closed shop here, I’m going to dig a little further into this as it seems a completely unfair way of treating potential new members.

    Regards, Carl

    馃榾

    Dave.

    in reply to: Sarena oven #204758
    Dave_Conway
    Participant

    Re: Sarena oven

    Try this by NWAR:

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=21161

    It’s probably the same timer 馃檪

    Dave.

    in reply to: Hinges for Hygena APL3422 #204547
    Dave_Conway
    Participant

    Re: Hinges for Hygena APL3422

    cookerfit wrote:Interspares but at 拢22.80 EACH plus vat & delivery, they seem a little pricey.

    Try 拢14.25 plus VAT each 馃槈

    Drop me an email cookerfit, I can get these for you 馃檪

    Dave.

    in reply to: Candy df145 #204653
    Dave_Conway
    Participant

    Re: Candy df145

    msappliance wrote:Its the 65 and 75 degree lights furthest on right side

    The two furthest right hand lights flashing is not a recognised fault code, sorry 馃檨

    msappliance wrote:Whats goin on in sale?

    Wind ? 馃槅

    Dave.

Viewing 15 posts - 391 through 405 (of 12,426 total)