Forum Replies Created
-
AuthorPosts
-
September 26, 2006 at 9:28 am in reply to: Whirlpool ADP 5966 Rinse aid Dispensor lid gasket #189612
Dave_Conway
ParticipantRe: Whirlpool ADP 5966 Rinse aid Dispensor lid gasket
481241868155 🙂
Dave.
Dave_Conway
ParticipantRe: Zanussi ZERD7446
Bottle shelf (lower) – 2062053315
Upper shelves – 2062052382Dave 🙂
Dave_Conway
ParticipantRe: Nardi LSISH E4 Fault code
It’s some kind of fill error but the translation is very odd 😉
Possibly an overfill condition where the water is still filling after the pressure switch has been triggered 😕
Dave.
Dave_Conway
ParticipantRe: Hygena APL4225 Fan Motor
It’s this one in our online shop:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=340
😀
Dave.
Dave_Conway
ParticipantRe: beko bits
SEME are the main Beko distributor in the UK 🙂
Moved to trade spares forum 😉
Dave.
Dave_Conway
ParticipantRe: Homark Miod. 01-711000A Brown Typ B11
From a user manual of the same manufacturer but not the same model but it will apply:
CHANGING THE OVEN CAVITY LIGHT BULB
First of all switch off the mains
supply to the oven.
The protective cap ‘A’ can be
removed by turning it anticlockwise.
The bulb can then be
unscrewed and replaced by one of
the same specification.
After replacing the bulb reassemble
the protective cap ‘A’ with metal
gasket ‘B’ and screw back into position“A” being the glass 🙂
The bulb will either be a 15w or 25w from here:
http://www.ukwhitegoods.co.uk/modules.p … Path=26_53
One of the top two 😉
Dave.
Dave_Conway
ParticipantRe: AEG Competence Thermostat Needed
A universal type would normally do the trick like this one:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=325
That fits quite a few Italian and German made cookers but without a complete model number it’s hard to be certain 😉
Check you’re old one for likeness (with the power off of course :zap:) 😀
Dave.
Dave_Conway
ParticipantRe: Zannusi ZT816 911827011
I would ask the engineer who fitted the motor (assuming it was) to check it over.
This is an electronically controlled appliance, the fault described could be a number of things to be honest.
If you need an engineer, chek the repairs@ link below 🙂
Dave.
Dave_Conway
ParticipantRe: Cuisina Built in Fridge Milk Holder / Tray
I can order it for you 🙂
The bottle shelf is £12.29 inc VAT and carriage, a bit of a delay on delivery though 😉
An email to spares@ukwhitegoods.co.uk please quoting the above if you’d like one
Dave.
Dave_Conway
ParticipantRe: Can’t re-set my dishwasher
It’s worth trying a reset, this model is made by Smeg and there are several references to the procedure here;)
The search facility will find it for you 🙂
Dave.
Dave_Conway
ParticipantRe: Belling XOU252BL
Stoves (Glen Dimplex) own Belling now, you can get the manuals by phoning them on 0870 444 9929 🙂
Dave.
Dave_Conway
ParticipantDave_Conway
ParticipantRe: Fan for AHY3300
I guess it’s the oven fan motor required ?
Part number OFANMTRB at £40.19 inc VAT and carriage, an email to spares@ukwhitegoods.co.uk please quoting the above if you’d like one 🙂
Dave.
Dave_Conway
ParticipantRe: Prima/Whirlpool Dishwasher
philes wrote:Also, we’re trade, but how do we register to get into the trade forums ?
Have a read of this:
http://www.ukwhitegoods.co.uk/modules.p … age&pid=26
Go to step 2 😀
Dave.
Dave_Conway
ParticipantRe: Hotpoint RF66P Fridge over cooling
You will only get the pot from an electronics supplier, Hotpoint themselves only supply the complete PCB at around £150 😯 😯
Assuming that is the fault of course 😉
We can’t tell you how to take it apart I’m afraid, if you need help, please check the repairs@ link below 🙂
Dave.
-
AuthorPosts
