Forum Replies Created
-
Posts
-
Re: Samsung Fridge/Freezer SL39WJ1/XEU HELP PLEASE !!
Let me know if you don’t get it, BT’s email servers are horrendously slow at the moment 😥
Re: Samsung Fridge/Freezer SL39WJ1/XEU HELP PLEASE !!
I’ve just emailed the user manual to you 😀
Have a read through and see if helps at all.
Dave.
Re: technik dw2677
This one’s a Whirlpool machineman 😉
It should be displaying an error code of some sort, you can check these against the “known fault codes” for Whirlpool at the start of this forum.
Dave.
Re: AEG OKO LAVAMAT 74620 UPDATE WASHING MACHINE
Part number is 1100990066, about a tenner trade ex VAT.
Hope this helps.
Dave.
Re: Samsung Fridge/Freezer SL39WJ1/XEU HELP PLEASE !!
I can confirm the dating for you, the 18 months is correct as the unit was 1st produced in 2003.
As Penguin says, let us know your postcode, someone here should be able to help with a service visit.
Dave.
Re: Bernstein Group Refrigerator
This one is a Haier made unit but I wouldn’t be at all surprised if it wasn’t the common hinges Penguin mentioned.
If you have look at them both here:
http://shop.ukwhitegoods.co.uk/hingekit … -hinge-kit
Other than that, if you email me a piccie of yours I’ll be able to tell.
Dave.
Re: homark fan oven element
It just so happens we have the element here in the UKW shop.
If you follow this link:
http://shop.ukwhitegoods.co.uk/2040-coo … an-element
Dave.
Re: Baumatic BT900W Built-In Double Oven (Main Oven Fault)
JKH, can you drop an email to spares@ukwhitegoods.co.uk and I’ll check out more info for you when I’m back at the office on Wedneday.
Dave.
Re: Indesit we165
That part isn’t in the shop, I can order for you though if required.
Drop me an email to spares@ukwhitegoods.co.uk and I’ll get back to you later in the week when I’m back at the office.
Dave.
Re: Washing up
Karen wrote:I’ll start the washing up then!
:rotl:Karen wrote:Is there a re-set on this model & if so, what do I do?
There is but I can’t recall what is is, normally there is a line beneath the buttons, hopefully that is on yours ?
Karen wrote:Post code = SP10 1HR
No-one in the directories I’m afraid 🙁
I’ll check my office contacts on Wednesday unles somoene else responds beforehand, and appologies for the fairy liquid picture :martin: 😉
Dave.
Re: homark fan oven element
mrcrow wrote:homark model no 02 700301
That’s enough to identify thanks 😉
mrcrow wrote:do i need to buy a special 6 pointed star screwdriver to get the screws out or is there a ‘tip’ on modifying an ordinary or phillips screwdriver to do this job
It’s called a torx 😀
mrcrow wrote:finally since you mentioned oven out…are the 4 screws which go through the side cheeks into the carcase all that holds it in
Normally yes.
Dave
Re: Bosch fridge freezer
Please do not tamper any further, you need an engineer !!
And please do NOT plug the appliance back in to the power, you could cause permanent damage to the appliance.
I don’t wish to appear rude but it is evident that merely connecting the leads as you think has not worked.
Let us know your postcode and someone should be able to help with a service visit.
Dave.
Re: Bosch WFP Error code F02
Martin, can you post the full model number please, WFP???GB/??
Thanks
Dave.
Re: Bosch sps5462GB/18
Hi Karen.
If you have a no fill problem and you’ve done all the usual checks, it’s most likely you will need an engineer to correctly diagnose and rectify for you.
If you pop up your postcode, someone here should be able to help with a service visit, although it may not be until the new year now.
It’s a bummer when appliances fail at this time of year 🙁
But we have to have some time off as well 😉Dave.
Re: homark fan oven element
mrcrow wrote:
ps that top grill element…with the screws showing coming through from the opposite side..ie not the heads…is that a pull out job?Nope, that one is secured from behind, ie, the screws enter the element mounting plate from the rear, which is an oven out job.
If it’s working, best left alone until it fails really 😉
If you post up the model number of the oven, I should be able to help with part numbers/prices etc for the fan element, not until Wednsesday now though.
Dave.
