Dave_Conway

Forum Replies Created

Viewing 15 posts - 1,276 through 1,290 (of 12,426 total)
  • Author
    Posts
  • in reply to: Kirby Spares #183973
    Dave_Conway
    Participant

    Re: Kirby Spares

    Qualtex do a fair range of the common parts 🙂

    Topic moved to trade spares as well 😉

    Dave.

    in reply to: SMEG SLIMLINE ‘NO SALT’ LIGHT WON’T GO OUT #183957
    Dave_Conway
    Participant

    Re: SMEG SLIMLINE ‘NO SALT’ LIGHT WON’T GO OUT

    It’s probably the salt indicator switch on the salt chamber itself.

    The part is just under £20 with vat etc so not a costly repair 🙂

    Power off if checking yourself or check the repairs@ link below if you need an engineer as it’s quite an involved job 😉

    Dave.

    in reply to: hoover hnc170 jockey pulleys #183969
    Dave_Conway
    Participant

    Re: hoover hnc170 jockey pulleys

    Pulley part number – 03850307
    Support arm is – 90386979

    🙂

    in reply to: Bottled gas to run New World Nova? #183953
    Dave_Conway
    Participant

    Re: Bottled gas to run New World Nova?

    Simply no, they won’t. No natural gas product will work with LPG unless is has various changes done, normally just the jets on cookers.

    You will need a Corgi registered engineer to do this for you.

    Contact details can be found on this sticky:

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=16259

    Dave.

    in reply to: Diplomat ADP0300 #183944
    Dave_Conway
    Participant

    Re: Diplomat ADP0300

    It’s made by Stoves and yes, they all have that gap at the top of the door seal.

    I doubt there’s anything wrong to be honest, if you’re in doubt though the repairs@ link below should provide an engineer who can check it over for you 🙂

    Dave.

    in reply to: Hoover SE 220 Disp to Pmp Hose? #183934
    Dave_Conway
    Participant

    Re: SE 220 Disp to Pmp Hose?

    Eyes in the back of my @*{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}¬ 😀 :happy:

    in reply to: Hoover SE 220 Disp to Pmp Hose? #183932
    Dave_Conway
    Participant

    Re: SE 220 Disp to Pmp Hose?

    What happened to Matron Greg ? 😆

    in reply to: Hoover SE160E UK Not Draining #144395
    Dave_Conway
    Participant

    Re: Hoover SE160E UK Not Draining

    Or order it here:

    http://www.ukwhitegoods.co.uk/modules.p … cts_id=496 🙂

    Dave.

    in reply to: Diplomat ADP0300 #183942
    Dave_Conway
    Participant

    Re: Diplomat ADP0300

    Hinges/hinge supports and/or the door seal by the sound of it.

    Does the door shut firmly when closing ?

    Dave.

    in reply to: Baumatic BHWM10 belt required p/no (xi) 36060200 #183945
    Dave_Conway
    Participant

    Re: Baumatic BHWM10 belt required p/no (xi) 36060200

    It’s a Siltal, in stock at Masterpart for about £7 😀

    Dave.

    in reply to: Stoves 059037805 #183941
    Dave_Conway
    Participant

    Re: Stoves 059037805

    That model isn’t listed on the current spares disk for some reason, I can certainly enquire/order for you though, drop me an email to spares@ukwhitegoods.co.uk please 🙂

    Are all the knobs the same by the way ?

    Dave.

    in reply to: Indesit WD12XUK Thermistor #183927
    Dave_Conway
    Participant

    Re: Indesit WD12XUK Thermistor

    tg wrote:1.What is the part number for the thermistor?
    2. Where can I get one?

    C00080767 at £10.06 inc and from here, an email to spares@ukwhitegoods.co.uk please 🙂

    Ensure power is off with panels removed :zap:

    tg wrote:The site doesnt show an engineer in the area I need one, SA71 5NU, deepest darkest Pembrokshire……

    Try these guys:

    Rob Morgan Electrics 01834 844913

    If you use their services then please ignore the above as they will be able to supply the spare as well 😉

    Dave.

    in reply to: DEAD! Ocean APM 6825 #183925
    Dave_Conway
    Participant

    Re: DEAD! Ocean APM 6825

    A typical PCB fault by the sounds of it, this thread may help (different model but it has the same components)

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=15641

    Dave.

    in reply to: Hoover SE 220 Disp to Pmp Hose? #183931
    Dave_Conway
    Participant

    Re: SE 220 Disp to Pmp Hose?

    Hoover part number is 91620000 (now a corrugated hose to stop the rubbing) 😀

    Dave.

    in reply to: SMEG DWI612c fault #183892
    Dave_Conway
    Participant

    Re: SMEG DWI612c fault

    Are there any other of the five led’s on at the same time as 5 flashing ?

    Dave.

Viewing 15 posts - 1,276 through 1,290 (of 12,426 total)