Forum Replies Created
-
AuthorPosts
-
July 7, 2005 at 6:17 pm in reply to: No Gas Supply to main or second oven – Zanussi zcg7900xn #140509
daza
ParticipantRe: No Gas Supply to main or second oven – Zanussi zcg7900xn
well i am a corgi reg engineer and i do do alot of cookers so you problem lies with ffd or thermocouple.If ffd fitted then the solanoid may be sticking,or jst a loose connection from the timer.. 😉
daza
ParticipantRe: Blomberg door hinges rusted through
hi best option you have is to phone comet cust care,as they will be able to help as comet do all warenty work for blomberg, although you will need coorect model no
June 4, 2005 at 6:37 pm in reply to: Whirlpool S20BRBB20-A/G [american style] excessive freezing #136834daza
ParticipantRe: Whirlpool S20BRBB20-A/G [american style] excessive freez
Idealy before you pay out any more money get some one to check your appliuance out who has a SAM Module this is purpose built for all Whilpool appliances,this will self diagnose any fault with your appliance and re configure the main pcb,this will help you determine what the problem is. 😉
daza
ParticipantRe: HOTPOINT Aquarius WMA37 Putting holes in things!
Daft question if your spinning on the 1400 spin with very dalicate or thin materials of clothing then the suction from the spin will cause the garments to tear so idea would be to reduce the spin speed.
regardsdaza
ParticipantRe: Elba C96G rangestyle cooker
be very careful when looking for these range cookers ,as Comet sell the Delongi look alike to your elba.
These are a very un rated cooker due to the main selector switch getting to hot from reflected heat of the large front left burner and melting the insulation of the wiring loom to the selector switch.Only repair to be done if this happened is to replace the complete wiring loom and add a deflection plate underneath the burner.
Hope this helps you? -
AuthorPosts
