Forum Replies Created
-
Posts
-
Re: Thanks Ken, John,David,….
Thankyou all at UKWG for the package that was waiting on the doorstep when we arrived home this evening 😀
Happy new year 😛
Don
Re: hotpoint solenoid valve
Hi John
Valve and dispenser assembly C00143588. If you can find one 😕 Connect stock not due until w/e 21st January.
Don
Re: shower replacement
Hi Phil
Showers are not really our forte I’m afraid. However Showerdoc should be able to help though.
Don 🙂
Re: Shallow depth integrated washer dryer suggestions.
Or a slim depth machine like the Bosch WLX24164 and hang a wooden door on a post, if you really want the integrated look. Just be aware the Bosch only has a 4.5 kg load capacity.
HTH 🙂
Don
Re: Shallow depth integrated washer dryer suggestions.
Hi
Not one that I am aware of I’m afraid.
If it’s a case of obtrusive plumbing restricting the depth, can the pipework be re routed?
If you have a slim depth worktop one option could be to install a 40cm deep washing machine behind a decor door.
HTH 🙂
Don
Re: Oven / hob / fridge-freezer / hood choices: thoughts ple
Hi Tara
Fitting an induction hob over a built under double is always a no no as you cannot achieve ample ventilation for the cooling fans to keep the hob fuctioning correctly.
A single oven is fine as long as the installation is in line with the guidance notes on page four of the instruction manual
Bosch produce a single oven which you can have either right or left hand hinge while Neff have a couple with a slide away door for even more space saving.
HTH 🙂Don
Re: Terim Range Cooker Instruction Manual
Hi Sara
You will probably need to go direct to Terim in Italy As far as I kmow there is no UK office.
HTH 🙂
Don
Re: ASHES 2010/2011
You can only beat the team that’s put in front of you Jim 😀
Siddle has been the exception to what must be said has been an under performing series performance from the Aussies.
Ashes coming home with one test to spare 😀 😀 😀
DonRe: raw washers dryers and cookers
Hi Bruce
Type raw AND appliances into the search function which you will find towards the top of each page. There are quite a few threads to be read.
HTH 🙂
Don
