Forum Replies Created
-
Posts
-
Re: Carbon filter
Hi
If no one comes up with a pattern variant you could try http://www.hygenadiplomatspares.com/ your model is listed by clicking the Hygena link, it does come up with a different filter part number though.
HTH
Don
Re: Pat Test Failure Whirlpool ADP4501/5
Hi garn
If you happen to come across this roadshow could you get some contact details, venue locations or even better a web address. I`m sure if people knew about it they would support it especially if it means free refreshments.
Don
Re: American style f/f..integrated options?
Hi Gaz
I wasn`t thinking laterally yesterday, the answer was here in the shop all the time 😯 got me trusted tape measure out this morning on the American fridge freezers I have here. I forgot about the door thickness 😉
Right then off to the shops you go 🙂 The American cabinets are on average 68cm deep including the doors, the actual cabinets are 60cm deep. The clever bit is that the thickness of the doors would be in front of the larder unit if a standard 60cm depth one is fitted, this allows the doors to be swung right back almost to 180 degrees.
HTH 🙂
Don
Re: gorenje washer dryer
Masterpart carry Gorenje spares as do Independent Service 0845 0508539, make sure you have the ART number to hand.
Don
Re: American style f/f..integrated options?
gazcoign wrote:
I have about 1200mm to play with,
Hi GazCan you be precise please on the width as it could be critical.
Don
Re: Stoves Newhome 600sidom double oven
Hi
An email to spares@ukwhitegoods.co.uk should get the ball rolling, don`t forget to include the colour required and the serial number.
HTH
Don
Re: American style f/f..integrated options?
Hi Gaz
No pressure then 😆 As far as I know all the American SXS have the fridge on the right. If you can post up the total width you have available I`ll see if anything can be done.
Don
Re: In search of the fourth cord
Lee8 is at it again in the 0800 thread, too strong for my liking, there`s no need for it.
Don
Re: fitting of kitchen door without plinth
truenorth wrote:
do I need to know anything specific about the ventilation – I guess it’s coming out of the back of the unit?Cheers TN
Yep you will need to consult the installation instructions for ventilation. The only other area of concern would be if it needed a repair whilst under warranty, Neff could say “it`s not been fitted in accordance……… and under our terms of the guarantee it`s now null and void”.
HTH 🙂
don
Re: fitting of kitchen door without plinth
HI TN
In that case you may be able to fit This Neff in column fridge under your worktop, you may have to adapt the install as the cabinet design is different to an under worktop built in fridge like this one
The only other option would be a traditional freestanding fridge.
HTH
Don
Re: fitting of kitchen door without plinth
Hi TN
Is the height available the standard 860mm to underside of worktop?
Don
Re: Domestic Appliance Testing
Hi guys
In the absence of Martin, copies as requested on their way to msappliance , funbobby and daveh.
Don
Re: which bosch is best
Hi
Tis only capacity and spin 😉 the WAS is an eight kilo 1400 spin the other two are a 7kg 1200 and 1400 spin machines. First off I`d consider the load sizes taking that into the equation I`d probably go with the 7kg 1400 option.
However on that sort of usage of approx 1274 cycles per year I would get your customer to seriously consider the ISE10 1600 spin AAA rated with a full 10-year warranty much sturdier machine that will last and last.
Don
Re: The Martin Conumdrum
In the absence of Martin, I have a copy of the test procedure wanted here shall I mail it out to those who request it?
Don
