Forum Replies Created
-
AuthorPosts
-
April 19, 2023 at 8:43 pm in reply to: Hotpoint BIWDHG7148uk washer dryer leaking from soap drawer #485940
DWSERV
ParticipantHave had this problem on Hotpoints that are a couple of years old…replace the Upper Hopper Cover Assembly
DWSERV
ParticipantPlenty of paperwork to submit, require photos of work pretty standard nowadays… also paid for labour in advance 😉
DWSERV
ParticipantDefinitely one or more relays fail …..couldn’t find in UK had to import on slow boat from China do ASWO stock them?
DWSERV
ParticipantThe control panel 17630700007 fixed the problem.
DWSERV
ParticipantThink I will start with the touch panel first thanks Jem.
DWSERV
ParticipantThe red water alarm is flashing and beeping during the filling phase…continues to fill and then starts washing where the wash motor runs at a lower speed where only the lower spray arm rotates.
DWSERV
ParticipantWondered if anyone got experience with the above model of Beko integrated dishwasher.
Power up the dishwasher and all led’s light and there’s a beep then nothing cannot switch it on. Is it common that the touch panels fail or is it the main control pcb or both? Checked door harness.DWSERV
ParticipantThanks, Dave
DWSERV
ParticipantAs I recall the customer called back to say it completed one drying cycle on timed then it failed again.
DWSERV
ParticipantA bit late now but the I thought Its better to post my fix. I cleared the pump chamber of wet lint reassembled the pump and ran it again all appeared to be working fine. 24 hours later call back to the same problem pulled the pump out again and scrubbed it clean with a toothbrush voila sorted.
DWSERV
ParticipantFault codes displayed are 07 17 & 07 19. rapid temperature increase Ntc’s all check out in service mode and ohms measurement
DWSERV
ParticipantThanks, Dave, it turns out I’m looking at a F06 door won’t open/unlock or control board fault. I cannot recreate the fault customer states load spun no water left in drum. No insulation problems which surprised me considering it’s located in an outdoor coal cellar.
DWSERV
ParticipantThe fault code from the customer is wrong the actual code is E64 no mention of it in the service manual. Door locks and two beeps nothing after that door will eventually unlock if left.
DWSERV
ParticipantI’m the same getting too old for all the guess work nowadays, eBay’s prices are better. Was picking up the Hotpoint askoll dishwasher wash pumps for £38.00 Inc delivery…. connect price £88 + vat Hoover washing machine wash motor £45.00 delivered new in box. Some items are obviously ex van stock.
DWSERV
ParticipantThanks guys, do you have a link for the Whirlpool smart web page
-
AuthorPosts
