endecotp

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: Karcher WD2 rubber squeegee strip #493448
    endecotp
    Participant

    don wrote:You need to photograph the rating plate and enter the details to get your model info up.

    Don

    I don’t see that function on the page that you linked to….

    in reply to: Karcher WD2 rubber squeegee strip #493446
    endecotp
    Participant

    don wrote:You can get all spares from Karcher direct

    I don’t think they sell the squeegee strip by itself – do you believe otherwise?

    in reply to: Telescopic shelf rails for AEG BES355010M oven #493168
    endecotp
    Participant

    You are right about the part number; the packaging for mine says …7504, not …75504. The wrong number came from the eBay listing.

    So do you have a way to get from a part number to a list of appliance model numbers? All the sites I’ve used will let you enter your appliance model and it will tell you if the part is compatible, but not enter a spare part number and get a list of appliance models.

    in reply to: Telescopic shelf rails for AEG BES355010M oven #493166
    endecotp
    Participant

    tedwards101 wrote:John Lewis JLBIOSS750 (PNC:94418243301) is fitted the telescopic runners and this is the part for them:
    https://shop.aeg.co.uk/cooking/cookers-ovens-hobs/telescopic-runners/oven-telescopic-runner-set/p/5611854117

    Many thanks for that. Your post came about an hour after I had ordered a random pair on eBay which have now arrived.

    Now that I look at the shop.aeg.co.uk website, I see that it does offer those rails (part 5611854117) when I enter my oven’s model number – yet none of the thrid-party spare parts suppliers did.

    The ones I’ve bought are part number 8090975504. They might differ slightly in the position of the post at the back end of the rail. I wonder if the shape of the shelves has changed slightly? They connect to the oven side grids perfectly, but I’m not sure where the post at the back is supposed to be relative to the corner of the shelf. Hmmm. These ones cost me about £30; the other part number is £70.

Viewing 4 posts - 1 through 4 (of 4 total)