[FLORIN]

Re: Hoover AE 140 – no motor action

So I did this experience:
I put instead that burned resistor a 25kohms variable resistor, set it to a middle value of 12kohms.
And it works verry well.So I replace it with a 12kohms – 1/4 watts, and the motor works perfect. 8)
So I hope it will help: this kind of module-timers does not let the motor to work, if the tacho circuit is burned… 😉

Cheers,
Florin

[FLORIN]

Re: Privileg Dynamic 6512 allmost 3 hours for one program

THANKS CHRIS 🙂

[FLORIN]

Re: Privileg Dynamic 6512 allmost 3 hours for one program

I`m sorry Martin if is not the right place to post theese facts, but today it was easy for me to send some messages because I was not so busy, and I thot it will help somebody with theese posts…
Again, sorry. 🙁

Regards,
Florin

[FLORIN]

Re: Privileg 1105 washer

Thanks Chris. 😀
Endeed, lot of work in Privileg`s machines, but not often like in Indesit stuff…

Cheers,
Florin

[FLORIN]

Re: New Year

Hi all,

With all my respect, I whant to wish you all a verry happy and good year, and many satisfactions, for you, your friends, and your famillyes. 😀

Cheers,
Florin

[FLORIN]

Re: INDESIT W161UK NO HEATING

Check the continuity, check the relay contacts on pcb, earth circuit of the machine is ok, but I still have same problem: the heater`s relay make the contact, but only for one minute then stops.In this time the machine do the wash program till the end, without any error signals and timer`s knob rotations.
Any ideas how this problem can be resolved? 🙁

Cheers,
Florin

[FLORIN]

Re: INDESIT W161UK NO HEATING

Many thanks Penguin45, but you see, i`ll check the continuity. Although if the motor works, and if I put another consummer instead the heater element of the machine the pcb do the work.I`ll check also the black wire witch goes to the motor.
Anyway, thank you for your help.

cheers,
florin

[FLORIN]

Re: London Bomb Blasts

I never saw Mr. Blair like it was today, I hope I will never see him like today.God bless you, dear friends from United Kingdom!

FLORIN

[FLORIN]

Re: zanussi fjs1225

IT`S ALLRIGHT DAVE ,I`LL BE WAITING.

FLORIN 🙂

[FLORIN]

Re: ELECTRONIC PARTS FOR MERLONI MODULES

THANK YOU DAVE FOR YOUR ADVICE. I HOPE THEY HAVE THOSE TYPE OF MODULES. 🙂

[FLORIN]

Re: MODULE FOR INDESSIT

THANKS MARTIN, I`LL TAKE CARE.

FLORIN

[FLORIN]

Re: ELECTRONIC PARTS FOR MERLONI MODULES

Hi Martin,

Exactly the uk stuff I`m interessed, sorry I didn`t speciffied earlier.

Ceers,
Florin

[FLORIN]

Re: zanussi fjs1225

Thanks Dave,

I will do so.

Cheers
Florin

[FLORIN]

Re: zanussi fjs1225

Hi there,

It happened also to me Dave, and I tryed to change the transistors witch are implicated in the circuit of that relay who give the electric power to the heater thru the pressure switch`s contacts…
But no result. 🙁

Cheers,
Florin

[Author]

Posts