folleyball

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 89 total)
1 2 3 4 5 6
  • Author
    Posts
  • December 11, 2014 at 8:26 am in reply to: Nef f U1722N0GB/02 cut out #422600
    folleyball
    Participant

    Re: Nef f U1722N0GB/02 cut out

    Thanks Martin

    November 17, 2014 at 11:11 pm in reply to: Neff S54E53X1GB/86 Dishwasher #421623
    folleyball
    Participant

    Re: Neff S54E53X1GB/86 Dishwasher

    Hi Dave

    Thanks for the quick reply.
    It was gunked up but the float was sat at the bottom. There is nothing pushing against the button on the micro switch.
    Could it be anything to do with the impellor flow meter?

    September 26, 2014 at 10:14 pm in reply to: Beko WM5100 #419640
    folleyball
    Participant

    Re: Beko WM5100

    I’ll be honest I don’t know how to do diagnostics on Beko machines.
    I’ve never had any trouble with Beko machines apart from blocked pumps and brushes!

    September 24, 2014 at 8:26 pm in reply to: Hotpoint WMPF843 problem #419547
    folleyball
    Participant

    Re: Hotpoint WMPF843 problem

    Thanks Martin I shall try that next time.

    April 26, 2014 at 10:06 am in reply to: AEG C41029G Range cooker door hinges #412833
    folleyball
    Participant

    Re: AEG C41029G Range cooker door hinges

    That’s superb, thank you so much

    April 24, 2014 at 6:36 pm in reply to: AEG C41029G Range cooker door hinges #412830
    folleyball
    Participant

    Re: AEG C41029G Range cooker door hinges

    Yes they’re the ones listed, but the ones on this model only have one arm.

    February 26, 2014 at 3:39 pm in reply to: Tyres for van #410331
    folleyball
    Participant

    Re: Tyres for van

    Sorry Martin its 9000 a year and yes its still rubbish.
    Most of my jobs are in a 20 mile radius.
    And I don’t take the family far on holiday!!!

    Cheers Bryan think I’ll try the Avons

    February 26, 2014 at 12:01 pm in reply to: Tyres for van #410327
    folleyball
    Participant

    Re: Tyres for van

    I’d say about 7000.
    Most of work is local.

    February 5, 2014 at 11:10 pm in reply to: Indesit CAA55 fridge freezer #409034
    folleyball
    Participant

    Re: Indesit CAA55 fridge freezer

    Yep its 14 & 16!

    Thank you for your help

    November 21, 2013 at 11:22 pm in reply to: SAMSUNG BF30N3T11 #404995
    folleyball
    Participant

    Re: SAMSUNG BF30N3T11

    Can’t thank you enough.

    November 2, 2013 at 10:24 am in reply to: Bosch WTE84105/31 Condenser dryer #403785
    folleyball
    Participant

    Re: Bosch WTE84105/31 Condenser dryer

    I will let you know on Monday. Thankfully there nice patient customers who are in no rush. Not many of them about anymore!

    November 1, 2013 at 11:26 pm in reply to: Bosch WTE84105/31 Condenser dryer #403783
    folleyball
    Participant

    Re: Bosch WTE84105/31 Condenser dryer

    Yes Quite bizarre really.
    I was fitting a replacement door seal on there Bosch washer and they just mentioned that the handle on the dryer was loose.
    The dryer was on. The guy just opened the door to show me. I swapped the handle straight away. 3 screws tightened later and I carried on with the washer.

    October 28, 2013 at 6:20 pm in reply to: AEG washer dryer door seal #403510
    folleyball
    Participant

    Re: AEG washer dryer door seal

    Cheers Martin.
    I’ve never bothered with fairy as its not kind to my hands!
    But it worked a treat on this one 🙂

    October 17, 2013 at 9:38 pm in reply to: Zanussi ZJD12191 #402440
    folleyball
    Participant

    Re: Zanussi ZJD12191

    Many thanks for the advice.

    Went back today. All worked fine until I tried the dryer. Then the same problem arose. Disconnected the element and it’s working fine now. Just to rub it in, the job straight after was the exact same problem – you can’t make it up sometimes!!!

    October 9, 2013 at 9:54 pm in reply to: Beko dryer fitting belt #402438
    folleyball
    Participant

    Re: Beko dryer fitting belt

    I’ve done 3 of these.
    Definatly put the new pulley on, it is slightly smaller.
    The worst thing about these is your hands get ripped to shreds!

  • Author
    Posts
Viewing 15 posts - 46 through 60 (of 89 total)
1 2 3 4 5 6