[fostexboy49]

Re: re Hotpoint EW81P Dial Indicator not rotating with dial

Thanks Jim

[fostexboy49]

Re: re Hotpoint EW81P Dial Indicator not rotating with dial

cheers iadom. Have not been to machine yet told over phone is this the usual culprit, anything else that can do it ?

[fostexboy49]

Re: Re Whirlpool AWO 3551 Wont Start

Had Motor Out checked ok, Brushes ok like new, Armature ok. Continuity across Brushes ok. Field inc 1/2 field ok and tacho. Tried another lock still wont start. Checked for broken wires none found HELPPPPPP! Thinking Timer now any other suggestions (scrap i hear you cry)

[fostexboy49]

Re: Re Whirlpool AWO 3551 Wont Start

Good Point Penguin, We have all had a few of those over time.

[fostexboy49]

Re: Re Whirlpool AWO 3551 Wont Start

Cheers Penguin so probably the brushes stopping the door from locking egh! another superb idea

[fostexboy49]

Re: re Creda 48339 halogen removing unit

Tanks Steve A great help will give it a go. Happy new year to you

[fostexboy49]

Re: re Creda 48339 halogen removing unit

Thanks for that Steve. Do the side panels pull out of the L Shaped End Caps easy ? Do You have to remove all thr screws down the front edges side trims ?

[fostexboy49]

Re: LG Direct Drive error CE

Cheers Penguin, thought as much

[fostexboy49]

Re: re Belling Format 636 Electric Hob

Cheers for that I was suspecting regulators as if elements blown they would not come on at all. Yeah the rear one is a single element glows all over but flat out and called a Fastlight probably its a standard element. the front right is a Halogen, outside glows fine but flat out inner section not coming on at all. Would you know if the front Halogen regulator is a duel Regulator

[fostexboy49]

Re: Hotpoint 6556p Dual Fuel stand alone cooker

Thanks Cessna no combination of holding down 2 buttons can alter the programme or get “A” of the display.Pulle out buttons all ok must be timer cheers

[fostexboy49]

Re: Whirlpool Washer Dryer AWG320/3 Wont Spin

Thanks Peguin allready cleared pressure pipes / hoses so will go 4 pcb Cheers will post result

[fostexboy49]

Re: re whirlpool ADG 642WH DOOR DROPS

Thanks Penguin. Someone just told me I need from 4whirlpool site 2 x Brake door string with plastic ends that hook over hinge / spring and possibly 2 x whirlpool door springs to cure is that correct thanks.

[Author]

Posts