Galway

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 245 total)
  • Author
    Posts
  • in reply to: Beko drcs68w water tank full #384572
    Galway
    Participant

    Re: Beko drcs68w water tank full

    Float switch?

    in reply to: fisher and paykel top drawer fill hose?DD603H #380345
    Galway
    Participant

    Re: fisher and paykel top drawer fill hose?DD603H

    thanks John i will let you know how i get on

    in reply to: fisher and paykel top drawer fill hose?DD603H #380343
    Galway
    Participant

    Re: fisher and paykel top drawer fill hose?DD603H

    So i replaced hose .thought it was simple enough until i was watching it fill and new hose was bulging.so i took off again and connected up again ,no kinks found.in the midst of this going on i must have spilt water on the control board :eeek:
    have tried to dry out and am hoping it will work again.does anyone have part number for it in case of worsed case senario.
    thanks

    in reply to: fisher and paykel top drawer fill hose?DD603H #380342
    Galway
    Participant

    Re: fisher and paykel top drawer fill hose?DD603H

    thanks again

    in reply to: fisher and paykel top drawer fill hose?DD603H #380340
    Galway
    Participant

    Re: fisher and paykel top drawer fill hose?DD603H

    thanks a million
    are these easy enough to change.havent do one before

    in reply to: W/P ADP 242 WH #380095
    Galway
    Participant

    Re: W/P ADP 242 WH

    would think that flow meter would through up a fault code.
    is there a diaphram switch in sump.it mght be blocked up with gunge.

    in reply to: fisher and pykel D/W #380097
    Galway
    Participant

    Re: fisher and pykel D/W

    got model no DD603H
    product no. 88820-B
    it is leaking on back left hand side out onto floor.how do drawers come out to investigate? customer is to pull out dishwasher before i go back as it is wedged in place.
    thanks

    in reply to: bosch d/w sgs45c02gb/06 #379448
    Galway
    Participant

    Re: bosch d/w sgs45c02gb/06

    💡 i will just buy 30 reed switches instead : 😆
    thanks

    in reply to: bosch d/w sgs45c02gb/06 #379446
    Galway
    Participant

    Re: bosch d/w sgs45c02gb/06

    it was indeed the flowmeter.but i just replaced the micro reed switch on it .only about 2euro instead of having to buy new flow meter at about 30 euro.
    Thanks 😀

    in reply to: bosch d/w sgs45c02gb/06 #379445
    Galway
    Participant

    Re: bosch d/w sgs45c02gb/06

    will look at it tomorrow and report back
    thanks

    in reply to: tricity bendix Tm 220w #379346
    Galway
    Participant

    Re: tricity bendix Tm 220w

    thanks
    checked low heat button-seems ok.
    any ideas?
    is seems only the bottom half of heater that gets red?

    in reply to: whirlpool ceamic hob AKM613/BA #379357
    Galway
    Participant

    Re: whirlpool ceamic hob AKM613/BA

    thanks John

    in reply to: whirlpool ceamic hob AKM613/BA #379355
    Galway
    Participant

    Re: whirlpool ceamic hob AKM613/BA

    thanks
    857161315064

    in reply to: Whirlpool D/W F06? #378338
    Galway
    Participant

    Re: Whirlpool D/W F06?

    sorry Jim
    i was away all weekend .
    good to see you got it sorted 😀

    in reply to: Whirlpool D/W F06? #378335
    Galway
    Participant

    Re: Whirlpool D/W F06?

    no cant confirm that but they are cheap so might be worth a go.
    is the fill valve getting 230v? even for a split sec.
    what type of pressure switch is in the sump.is it the usual mesh front or the newer pressostat?

Viewing 15 posts - 31 through 45 (of 245 total)