Forum Replies Created
-
Posts
-
Re: Bosch SGS5312GB/12 problems
I don’t want to spend any more time or money on the machine. 🙁
The machine is about 8 years old. We are a family of 6 and the machine was being used at least 2 times per day. So now I’m thinking of a new machine. Any recommendations?
Re: Bosch SGS5312GB/12 problems
Thanks, Penguin.
All connectors are fully home and in the correct position. One of the black boxes on the was hot. Still no light.
What is the pcb?
Re: Bosch SGS5312GB/12 problems
I cleaned all the hoses.
Today I took out the circuit board and noticed one of the terminals ws burnt out. I re-soldered it and put the dishwasher on a normal wash 65 degrees. After 10 mainutes I opened the door to see of the water was hot, it wasn’t. I shut the door and pushed the switch – nothing, no lights. Took the circuit board out again noticed the terminal next the one I soldered was also burnt out, re-soldered it back together still nothing.
Options:
1. Admit defeat go and buy a new dishwasher.
2. Buy new circuit board.
3. Teach the kids how to wash up!Re: Bosch SGS5312GB/12 problems
Thank you for the reply.
I have dismantled and cleaned all the pipes and filters and now the machine is emptying correctly, hurrah!
The cycles are taking a long time to run. It seems that the water is taking a long time to heat. When I open the door during the cycle I notice the washing tablet is not fully dissolved, any ideas?
Re: Bosch dishwasher
😀 😀 😀
SUCESS!
I took the switch apart (how many springs????). The small brass wheel had come out of place. All back together and hey presto now working. Again thanks Penguin – YOU THE MAN…
Re: Bosch dishwasher
Thanks Penguin for your patience and quick response,
At last some progress after thoroughly cleaning the matrix I now have water entering the machine but I have to hold the switch – it is not catching. I will take this off and investigate (with the power off of course!).
