gazza57

Forum Replies Created

Viewing 9 posts - 16 through 24 (of 24 total)
  • Author
    Posts
  • in reply to: indesit Wi 335uk #166025
    gazza57
    Participant

    Re: indesit Wi 335uk

    normally these boards show blown tracks when faulty, did you disconnect motor plug to check across terminals, if top 2 pins on motor are open circuit it can cause your problem.hope this helps rgds gazza.

    in reply to: SAMSUNG RS21DCSV1/XEU recurring fault or not fixed? #158971
    gazza57
    Participant

    Re: SAMSUNG RS21DCSV1/XEU recurring fault or not fixed?

    ladies and gentlemen please be aware samsung give you a 2 year parts and labour warranty on these side/sides. as for comet engineers “i cannot comment” rgds gazza

    in reply to: indesit IDL 40 #163604
    gazza57
    Participant

    Re: indesit IDL 40

    hope reply is not too late,you say will not reset, but then all lights go out when reset? if you mean after selecting prog and than closing door all lights go out most probably circ pump, quite often when not able to select programme or reset these machines engineers presume module, qiuck check, unplug circ pump and see if it holds programme selects light, also if it has a inline heater fitted ie not in tub,earth faults can cause all sorts of spurious errors/symptons, even a megger meter is not able to confim at times .rgds gazza

    in reply to: Hotpoint built-in oven Model SD98PI #163514
    gazza57
    Participant

    Re: Hotpoint built-in oven Model SD98PI

    hi johnnyhoz will try and e- mail to you tomorrow thus, trust i wont be breaking any forum rules?? rgds gazza.

    in reply to: Hotpoint built-in oven Model SD98PI #163512
    gazza57
    Participant

    Re: Hotpoint built-in oven Model SD98PI

    Any particular part of the circuit you need, is it giving any fault codes. regards gazza

    in reply to: Indesit W103UKBG Overfilling – module? #162170
    gazza57
    Participant

    Re: Indesit W103UKBG Overfilling – module?

    just a note may save u some costs, if you are good with a soldering iron and have a desolder pump,u can desolder the eeprom from original module and put into socket on new module.please make sure half moon shape cut out on eeprom chip matches with cut out on socket when fiiting, hope this helps rgds gazza.

    in reply to: Ariston W/D AV1048CUK #162717
    gazza57
    Participant

    Re: Ariston W/D AV1048CUK

    door lock is thru timer, suspect contacts are welded together keeping neutral phase to interlock. rgds gazza.

    in reply to: Bosch to/from China #159317
    gazza57
    Participant

    Re: Bosch to/from China

    HI ALL (sorry caps lock off!0) just to really test us in the field and it is from a well known source, merloni dishwashers will be produced in china within 2 yrs. if they are anything like their motorcycles god help us, they copy honda (the legend) and produce crap, can u imagine copying merloni d/w. please all sign up now to your local church and samaritans. dont have nightmares. rgds gazza

    in reply to: water filters for samsung side by side f/f #162457
    gazza57
    Participant

    Re: water filters for samsung side by side f/f

    MANY THANKS FOR YOUR QUICK REPLY, JUST JOINED SO YOU CAN CALL ME “THE NEW BOY” FOR NOW! DID LIKE THE FORUM ABOUT THE GUY WHO “TOOK A TIN OPENER TO THE BASE OF HIS MACHINE TO CHANGE BRUSHES” ONE CAN ONLY WONDER, PROBABLY FIND OUT HES A BRAIN SURGEON IN THE REAL WORLD !! ALSO LIKE THE FORUMS ABOUT ANIMALS, ONCE DID A MICROWAVE CALL WITH AEG ENGINEER YEARS AGO, AS USUAL WITHIN 2 MINS “DO U KNOW WHAT IT IS YET?” 5 MINS LATER WE FIND MOUSE ACROSS TRANSFORMER TERMINALS, FRIED, HE LIFTS OUT WITH LONG NOSE PLIERS AND CALLS CUSTOMER “FOUND THE PROBLEM LOVE” SHE SAYS “WHAT?” HE HOLD UP MOUSE AND SAYS “THE DRIVERS DEAD!!” SHE PASSES OUT. OH THE MEMORIES WHEN I WAS YOUNG AND NIAVE. RGDS GAZZA 57

Viewing 9 posts - 16 through 24 (of 24 total)