Forum Replies Created
-
AuthorPosts
-
gegsy
ParticipantRe: Bosch Dishwasher – water heater faulty ?
Most likely the water point system on the heater IMHO
They are a pig to change on the stainless steel tubs.
Power off before attempting and for any future readers, please never LIVE test.Greg
gegsy
ParticipantRe: bosch
Dryer fill valve o/cct or clogged filter in fill valve.
Greg
gegsy
ParticipantRe: 08/09-Football Season
Im sure you should be out playing squash and not upsetting me 😆
Greg
gegsy
ParticipantRe: Bosch DHL555 Cooker Hood
Switch unit if required is p/no 152270 and is available from spares@ukwhitegoods.co.uk
Greg
gegsy
ParticipantRe: BOSCH WAE20461BY -F21 error
Will send you a little something 😉
Greg
gegsy
ParticipantRe: 08/09-Football Season
Top game, Burnley were mint. A total credit A++
I love footy of this calibre 😀
Greg
gegsy
ParticipantRe: The Martin conumdrum.
You lot are so childish bumping this…………………….fuk done it meself now 😳
gegsy
ParticipantRe: Bosch SGS53C12GB/21 clasixx dishwasher
Little motor is only available as part of the heater assembly unfortunately p/no 491756.
Never seen one fall out 😯
Greggegsy
ParticipantRe: bosch wfl 2872 gb/07
I would have to agree, pumps are almost indestructible IMHO
gegsy
ParticipantRe: Siemens HB750
Possible a module or as Martin suggested earth leakage on grill element IMO
Greg
gegsy
ParticipantRe: Bosch WOK2001GB
When you close the lid and select prog and then press start, is the lid locked or can you open it?
If you can open, then most culprit is the door interlock.
Available from spares@ukwhitegoods.co.uk , quoting p/no 263334Power off if you are to attempt any work on the appliance :plug:
Greg
gegsy
ParticipantRe: Siemens HB750
Error 15 – If the actual temperature is above 380°C, the heating elements switch off and the oven is locked.The oven door does not unlock until the temperature drops below 300°C again. (appliances with pyrolysis)
The error message is by deleted start from the customer service test program.
If the temp is no where near 380, then I would assume PTC gone west 😉HTH
Greg
gegsy
ParticipantRe: The Martin conumdrum.
What you call me 😆
gegsy
ParticipantRe: Siemens SIWAMAT5100 wm51000GB/01
When the pre-wash lamp flashes, there will be a noticable pause then flashing.
Count the flashes and post the amount counted please 😀Greg
gegsy
ParticipantRe: bosch classixx 1200 express problem
It drains during wash also which makes me think rinse hold may be activated?
Pop the model number up from around the door or the rear 😀Greg
-
AuthorPosts
