[gegsy]

Re: awz650 timer

Tom and Squadman, you have mail 😉

Greg

[gegsy]

Re: bosch sgs66a02gb/20

No problems, glad to help 😀
Greg

[gegsy]

Re: Tecnik TKD 795/2 wont drain

Hi
Labour off the top of my head app £40-£60 + your part.
Any problems , follow the engineer link below 😀

Greg

[gegsy]

Re: Tecnik TKD 795/2 wont drain

Hi
Some Tecnik are BSH Group some are Anglo Iberian and are totally unrelated 😕
Noticed your Tecnik or the Siemens weren’t on that list, but it will fit yours, trust me 8)

Greg

[gegsy]

Re: Tecnik TKD 795/2 wont drain

Have a look here http://shop.ukwhitegoods.co.uk/product_ … cts_id=355

Greg

[gegsy]

Re: bosch sgs66a02gb/20

Hi
Motor 488284 £81.60+
Seal Kit 416445 £22.80+

They are genuine retail parts and prices 😀

Greg

[gegsy]

Re: Tecnik TKD 795/2 wont drain

Hi
It maybe be some debris occasionally jamming the impeller, but more than likely its the pump itself tiring.

If required, pump is available from spares@ukwhitegoods.co.uk p/no 423048

Power off if you are to attempt yourself 😉

Greg

[gegsy]

Re: Tecnik TKD 795/2 wont drain

When you turn the impeller, it should “twang” every quarter turn. Also, it will not pump out with that cover off 😉

Greg

[gegsy]

Re: Tecnik TKD 795/2 wont drain

Hi
When you say water left at the bottom, do you mean its visible if you remove the filters? If so thats correct 🙂
If its above the filters in the tank then I would be looking at a drain pump problem.
Access to this is gained by removing the filters and identiying the plastic cover above pump impeller fixed by a Torx 20 screw;then remove said cover and see if anything is jamming the now visible pump impeller.

Greg

PS – this is a Siemens made appliance 😀

[gegsy]

Re: awz650 timer

Hi
Check your PM Tom 🙂

Greg

[gegsy]

Re: Bosch d/w SGI43E02GB/08

Oh yea and the angle :study: 😀

Greg

[gegsy]

Re: Admiral top loader

You’re a braver man than me alf 😀

Greg

[gegsy]

Re: For our own Mr Kenneth Watt

Happy Birthday you old fart!!! 😆 have a nice one.

All the best

Greg

PS – Tracey, Ken was hinting for one of them new ipod gadgety things 😉

[gegsy]

Re: Admiral top loader

Is it really violent when it goes into spin and, when stationary, if you move the tank to the left by hand, does it stay there or return to the centre?
If so its probably the snubber thats worn p/no 21001161.
However, you will need specialist tools to remove and replace this as it as a ruddy big spring coiled under tremendous tension.
Without the correct removal tool is just suicide.At best it will launch itself through the ceiling, at worst your face 😥

Greg

[gegsy]

Re: lg dryer fault code ele???

Moved to Trade section 😉

Greg

[Author]

Posts