Forum Replies Created
-
Posts
-
Re: Bosch WTL 5400 GB/04 Skipping Cycle
Just had a thought.
If the appliance is under loaded, then there is a chance that there will be not enough fabric between the drum and the paddles to actually sense a load ie machine thinking clothes are dry hence the short prog 😕Greg
Re: Bosch WTL 5400 GB/04 Skipping Cycle
Sorry missed that, just running stuff off quickly 😀
Will send you some info that will help.Greg
Re: Bosch WTL 5400 GB/04 Skipping Cycle
Hi
In that case its worth removing r/h panel and locating uplift hose to dispenser.
Remove both ends and make sure its clear top to bottom and also remove uplift pump and check impeller for fluff chaffing (ooer)HTH
Greg
Re: Bosch WTA 5400 GB/04 Skipping Cycle
Hi
Can’t find that model, but if its a condenser dryer, have you thoroughly cleaned the condenser unit,that the vent is clear and fan is working efficiently?Greg
Re: Bosch classix 1200 wfl2463gb
Hi
Removing with motor in situ may be ok, but let me know how you get on fitting the new ones without removing motor. 😀
Im not saying its impossible but for the sake of 2 bolts to remove, the time saved and your sanity; its worth it 😉Greg
Re: The Open
Anyways, back to normality, if thats ever possible 😆
https://www.alchemyworx.com/skysports/e … #downloadsGreg
Re: bosch dishwasher sgs4468gb/35
Redflame wrote:Was there a codeing sheet with the Module ? If so it might not be coded correctly !?
Was thinking the same, Martin has that now 😉
Greg
Re: bosch dishwasher sgs4468gb/35
Ere, Martin, I was avin a spot of trouble 😆
Try your email now 😉
Greg
Re: bosch dishwasher sgs4468gb/35
Martin wrote:Can you guys help me out here I wonder? PLEASE? :hmm:
Maybe 8) 😉 😆
Greg
Re: Van Signwriting
neptune wrote:………but dont we have a member somewhere who uses a pushbike?
leavemetogetonwithit 😀
Greg
Re: No Power Bosch SGV43A03GB Dishwasher
Hi
It maybe worth you checking the diverter part of the heater.
They tend to get water ingress from leaking o rings where the heater unit attaches to sump. A known culprit to make a clicking noise,trip the electric and in certain instances take out the module.
As for being dead, I would re check you have plugged connectors on module in the right location. Even though they are keyed IIRC at least one will fit where it shouldn’t 😉Power off if you are to attempt any of this :plug:
Greg
Re: Strange washing machine….
Hi
Usual suspect is the force of the water entering the drawer, blasting the powder everywhere.
Try turning the cold fill tap to the machine down, to stop this from happening. 🙂Greg
