gegsy

Forum Replies Created

Viewing 15 posts - 2,341 through 2,355 (of 6,724 total)
  • Author
    Posts
  • in reply to: Replacing Bosch control card #215118
    gegsy
    Participant

    Re: Replacing Bosch control card

    Hi
    Yes the old board can be re configured however we are unable to provide that information due to legal limitations placed upon us by copyright, sorry.

    Greg

    in reply to: Replacing Bosch control card #215116
    gegsy
    Participant

    Re: Replacing Bosch control card

    Hi
    Yes you could if you have some basic skills in reading configuration sheets 😀

    Greg

    in reply to: Shine on you Crazy Diamond. #181698
    gegsy
    Participant

    Re: Shine on you Crazy Diamond.

    Hi Jim
    Cheers for that, a nice chill out then 🙂

    Greg

    in reply to: Bosch SMS3042GB/03 heater element search #215094
    gegsy
    Participant

    Re: Bosch s5nz27b heater element search

    Hi
    If it turns out to be the heater it is p/no 282746 possibly available for spares@ukwhitegoods.co.uk but due to age it may be obsolete 😕
    Un plug appliance if you are to investigate :plug:

    Greg

    in reply to: whirlpool g2pdwl not heating water and not drying #215083
    gegsy
    Participant

    Re: whirlpool g2pdwl not heating water and not drying

    Hi
    I would check the heater first of all as this heats the wash water and aslo the drying rinse water.
    It is an inline instantaneous heater connected from the recirculation pump underneath.

    Un plug appliance if you are to investigate :plug:

    Greg

    in reply to: Replacing Bosch control card #215114
    gegsy
    Participant

    Re: Replacing Bosch control card

    Hi
    If you buy a new module the information comes with it. It can be tricky to follow and may result in damage if incorrectly coded.
    Engineers time varies from around the country. Try the engineers link below to find a local one and a guide to cost 🙂

    Greg

    in reply to: Replacing Bosch control card #215112
    gegsy
    Participant

    Re: Replacing Bosch control card

    Hi
    Same control module in both, however the module is a universal board and would have to be coded to the respective appliances 😉

    Greg

    in reply to: Shine on you Crazy Diamond. #181695
    gegsy
    Participant

    Re: Shine on you Crazy Diamond.

    Didn’t see it Jim, bugger.
    What I have been enjoying is Planet Rock on DAB radio they have been doing the Pink Floyd story, last part coming up but Im sure they will re run it.
    If you don’t have a DAB then you can always listen On Line.

    PINK FLOYD STORY: Part 4
    Sunday 27th May (6pm)

    This is the last part of the archive Pink Floyd Story, originally put together by Nicky Horne. This week, Roger Waters, Nick Mason and Dave Gilmour tell the story behind ‘Wish You Were Here’ and ‘Animals’. Listen out for artist Storm Thorgerson’s explanation of the ‘Wish You Were Here’ cover and Roger’s plans for the future of Pink Floyd, circa 1976. Despite being the last in the archive series, the Floyd story continues next Sunday with a special finale featuring a recent interview with Nick Mason updating and concluding the band’s legacy to date.

    Cracking station for all good old school rock 😀
    http://www.planetrock.com/

    Greg

    in reply to: Bosch SMS3042GB/03 heater element search #215092
    gegsy
    Participant

    Re: Bosch s5nz27b heater element search

    You could always test the heater to confirm you know 😀
    The older Bosch used to suffer from damage to the loom at the point where the door and loom pivotted, some bare wires even burnt a hole through the stainless 😯
    Has to be worth a check there if heater tests ok.
    Un plug appliance if you are to investigate :plug:

    Greg

    in reply to: whirlpool g2pdwl not heating water and not drying #215081
    gegsy
    Participant

    Re: whirlpool g2pdwl not heating water and not drying

    Hi
    If you could provide the 12 digit number below the barcode off the door inner, starting 85********** that would be helpful.

    Greg

    in reply to: Bloons #214997
    gegsy
    Participant

    Re: Bloons

    Stuck again now on 37 Pacatak 👿

    Greg

    in reply to: Bloons #214995
    gegsy
    Participant

    Re: Bloons

    Hi Don
    Im stuck on 33 “Danger” 😀

    Greg

    in reply to: Bloons #214993
    gegsy
    Participant

    Re: Bloons

    Martin wrote:At 01:19 this morning I could only I could only feel balloons

    😯 :phone: 😆
    Greg

    in reply to: Bloons #214991
    gegsy
    Participant

    Re: Bloons

    Don’t tell me you don’t find it addictive 😆

    Greg

    in reply to: Siemens Fridge – shelf support neeeded- KU15R05GB/44 #214936
    gegsy
    Participant

    Re: Siemens Fridge – shelf support neeeded- KU15R05GB/44

    Hi
    They are p/no 165789 available from spares@ukwhitegoods.co.uk

    Greg

Viewing 15 posts - 2,341 through 2,355 (of 6,724 total)