Forum Replies Created
-
Posts
-
Re: Bosch WAE24162UK trying find my serial number?
Hi
There is no need to register to qualify for the 2 year free parts and labour cover.
It is automatically given providing you can show a valid receipt to the engineer.
The only reason they want you to register is that Domestic and General Insurance can obtain your details for future use.Greg
Re: Holiday home, breathtaking views!
….. Or the scouse re make of “The silence of the Lambs”
Shut up ewes 😆
Greg
Re: Bosch WTL6103GB – Condenser Drier – pump problem
Hi Mick
Easiest first 🙂 Take lid of appliance off and locate the uplift pipe going to water tank.
Half turn the circular that pipe that it is on and lift up wards, winkle pipe off and check there first for blockage.Greg
Re: bosch dish overfilling sgs43t58gb/21
Hi
Its at the rear internally, inline with the fill valve feed pipe. Its white in colour, circular with two spouts at opposite ends.Greg
Re: TESCO £99 WASHER
Might be worth a look here aswell
http://business.guardian.co.uk/story/0,,2048406,00.html
Greg
Re: dishwasher – white deposits
Hi
1/ Its inaccessible/sealed
2/ Yes
3/ No, but looks like it may need removing and cleaning. 😀
4/ Should be clear, so not normal.The ribbed hose in question is accessible from the front by removing the lower plinth (outer door panel off may aid), the hose then is right in front of you.
Greg
Re: phillips series 90 brushes?
IIRC, they are barbed in.
A good pair of pliers on the brush holder and pull like buggery 😉Greg
Re: dishwasher – white deposits
Hi trilobite
The area you refer to is the drainage hose ventilation valve. Basically its to prevent airlocks in the drain system. With that much crud in there, its going to cause problems.Cheers
Greg
Re: dishwasher – white deposits
http://myweb.tiscali.co.uk/barfblog/gra … G_3174.JPG
The water matrix will definately need replacing for starters as its not accesible for cleaning and will cause no end of problems.
I would then look at the antiflood/pressure unit to the right of it, if it is gunged up and you can clean it all brilliant, if not you will need to replace that.
Last and not least you will need to remove and clean the clear ribbed pipe which goes from the metering unit to the sump.To prevent this in the future ignore what the book says as to loading; scrape the worst off in the bin and then give the plates a quick rinse under tap before loading, this will prevent this build up. Also a monthly maintenance wash as previously mentioned will work wonders 😀
Greg
Re: QED ?
Had reply back
helo_75 wrote:ur a gent thanx
i dont feel i have to apologise to him for tryin to make sure people conduct themselves safely
ill just ignore him, but id prefer it if he just left me alone!
Just for your info
Greg
Re: Bosch SGS43A loss of spray pressure
Hi
If requiredHeater p/no 483257 £61.70 VAT etc
Module p/no 490049 £68.10 +VAT etcThese can be obtained from spares@ukwhitegoods.co.uk
Greg
Re: QED ?
Had a PM of helo_75, see below
From: helo_75
To: gegsy
Posted: Wed Apr 04, 2007 4:41 pm
Subject: Re: Nasty emailhi mate..
sorry to bother you, but im still gettin crap off mike in horwichaparantly im childish, insecure , selfish arrogant, and trying to deny him the right to modify his f/f
sheesh, is there any way i could block him?
Have PMd back
From: gegsy
To: helo_75
Posted: Wed Apr 04, 2007 6:33 pm
Subject: Re: Nasty emailHi
You are not bothering me at all.
I will have to involve site admin at this time as intimidation from ANY user of the site is not allowed.
They have the ultimate decision.
As for blocking him, if you go into a forum where he has posted, there is an ignore button.Hang in there
Greg
I will leave mike to you Ken 👿
Greg
