gegsy

Forum Replies Created

Viewing 15 posts - 2,806 through 2,820 (of 6,724 total)
  • Author
    Posts
  • in reply to: bosch wff2001 #207912
    gegsy
    Participant

    Re: bosch wff2001

    Hi
    When you say stopped at the first pump out, does it make the usual pump noise or a low hum?

    Greg

    in reply to: Miele honeycomb drum: does it damage cotton clothes? #207830
    gegsy
    Participant

    Re: Miele honeycomb drum: does it damage cotton clothes?

    kwatt wrote:As for the honeycomb drum, I don’t have enough data on those machines to pass any sort of comment or judgement although I’d be surprised, a lot, if Miele put a machine out that was below par.

    Im sure you wrote this :snig:
    http://www.ukwhitegoods.co.uk/modules.p … le&sid=119

    Greg

    in reply to: Another joke. #137327
    gegsy
    Participant

    Re: Another joke.

    Subject: The Urologist

    Dan went to his appointment with the urologist.
    In the examining room he told the doctor, “Don’t laugh!”

    “Of course I won’t laugh,” the doctor said. “I’m a professional.
    In more than twenty years I’ve never laughed at a patient.”

    “Okay then,” Dan said, and proceeded to drop his trousers,
    revealing the tiniest ‘willie’ the doctor had ever seen.
    It wasn’t any bigger than a triple A battery.

    Unable to control himself, the doctor started giggling, then fell to the floor laughing hysterically.
    Ten minutes later he was able to struggle to his feet and regain his composure.

    “I’m so sorry,” he said. “I really am. I don’t know what came over me.
    On my honor as a doctor and a gentleman, I promise it won’t happen again.
    Now, what seems to be the problem?”
    >>
    >>
    >> .
    >>
    >>
    >> .
    >>
    >>
    >>
    >>
    >>
    >>
    >>
    >>
    >> “It’s swollen,” Dan replied …

    in reply to: Radio 2 #207854
    gegsy
    Participant

    Re: Radio 2

    Alex wrote:Anyone remember Smashie & Nicey all being retired off to Radio Quiet?Not arff! “You aint seen nothin yet”

    Sure do Alex 😆
    Dont you think think guy on right looks like Andy Gibb 😕

    Greg

    in reply to: SMEG UK80MFX1 DIAGNOSIS PLEASE #207751
    gegsy
    Participant

    Re: SMEG UK80MFX1 DIAGNOSIS PLEASE

    For more information – http://www.ukwhitegoods.co.uk/modules.p … ic&t=16259

    Greg

    in reply to: BOSCH WFR2866GB/01??? #207820
    gegsy
    Participant

    Re: BOSCH WFR2866GB/01???

    Ok Simon
    If any component has a short circuit or earth fault, the display will either go dark or have no function.
    Basically check components (heater first 😉 ) in turn,. replace as required.

    Greg

    in reply to: Whirlpool T/L 3RLBR8543JQ0 spinning slow #207652
    gegsy
    Participant

    Re: Whirlpool T/L 3RLBR8543JQ0 spinning slow

    Cheers John, thought that might of been it. Its been a while 😉

    Greg

    in reply to: BOSCH WFR2866GB/01??? #207818
    gegsy
    Participant

    Re: BOSCH WFR2866GB/01???

    OK
    You did check for cracks? don’t be fooled by 240v out of it, when push comes to shove there is no current when this faults, under load.
    Will do a bit of lookin for you and report back 😀

    Greg

    in reply to: Radio 2 #207851
    gegsy
    Participant

    Re: Radio 2

    He is a nice guy real life. Met him twice now on his Family Mahone gigs.
    Boy do them guys like a drink 😆
    Have a pic of us together but wouldn’t frighten you on here 😀

    Greg

    in reply to: BOSCH WFR2866GB/01??? #207816
    gegsy
    Participant

    Re: BOSCH WFR2866GB/01???

    Have you looked at the mains supressor 😕

    Greg

    in reply to: Whirlpool T/L 3RLBR8543JQ0 spinning slow #207649
    gegsy
    Participant

    Re: Whirlpool T/L 3RLBR8543JQ0 spinning slow

    Chris that one fits – AWG348/1, AWM909 and 3LSR5233AW.
    Have they changed it,it has been a while since last one :con:

    Greg

    in reply to: Radio 2 #207849
    gegsy
    Participant

    Re: Radio 2

    Absolutely, Johnny is a legend, Wogan and his TOGS should go on a pemanent holiday 😈
    As for Mark, bring back Lard and Radio 2 will have it sewn up :tup:

    Greg

    in reply to: Whirlpool T/L 3RLBR8543JQ0 spinning slow #207647
    gegsy
    Participant

    Re: Whirlpool T/L 3RLBR8543JQ0 spinning slow

    Hi
    P/no 481903949118 – £110.66 inc VAT IIRC
    Greg

    in reply to: Whirlpool T/L 3RLBR8543JQ0 spinning slow #207645
    gegsy
    Participant

    Re: Whirlpool T/L 3RLBR8543JQ0 spinning slow

    Yep, bolloxed 😈
    These are nice to work on TBH, once you get used to them.

    Greg

    in reply to: Neff T4742 Induction Hob #207786
    gegsy
    Participant

    Re: Neff T4742 Induction Hob

    Hi
    Some of the guys in the UKW list are BSH qualified, so never fear.
    The BSH call out is very reasonable in all fairness. I know for a fact that some of the lesser quality manufactureres do charge a lot more 😕
    At least if you get an engineer out you will know exactly what is required to repair, it will be cheaper in the long run foryou 🙂

    Greg

Viewing 15 posts - 2,806 through 2,820 (of 6,724 total)