Forum Replies Created
-
Posts
-
Re: Bosch KGN39V00 or KGN39X00?
Hi
You could also try here for that appliance http://tinyurl.com/2n9qokGreg
Re: Neff 1420 fan problems
Hi
Im taking model number as U1420K0GB/01.
Looking at wiring I would imagine that if you have heat and no fan operation then its looking like a faulty selector(S9) IMHO.Greg
Re: Bosch wash times
I have to agree with Bryan, they are more or less spot on.
If they are in a soft water area, then the rinse plus button will be of some use.
Overdosing detergent another problem when customers going from the older water guzzlers to the new energy conscious appliances.
Last and not least of course the loading, because its a bigger drum they always want to shoe horn the last bit in 😀Just giving some pointers, probably stating the obvious but if it helps 😉
Greg
Re: Neff U1421 – One oven not working / heating
Hi
The red light would still come on regardless of the element having blown, unless the element blew with significant force and damaged some other component like Simon said.
Can you provide the full model number, usually from around the door opening on a silver plate.Greg
Re: USA Whitegoods.com
All I can say is that good news travels far and we must be doing something right. Shame we can’t harness any revenue from overseas though 😀
Greg
Re: Neff 1420 fan problems
stinky wrote:Thank you for the advice, I am a fully qualified electrical engineer (HNC) so I am aware of the dangers of live testing.
That is of no significance. What we have to consider is the amount of general public that may read this and TBH any posts in the public forums, who may not be as aware of the potential dangers as you or I 🙂
For me to go any further I would need that full model number as requested please.Greg
Re: Neff 1420 fan problems
stinky wrote:When I power the fan up with 240 volts on a bench it runs OK
Please note that we at UKW do not recommend nor see the need for this sort of LIVE testing. With a decent ohm meter the reading/s needed can be obtained. ❗
Does the fan motor spin freely if you spin it by hand and not sluggish?
We will also need ful Enr number, usually found around door opening on a silver plate.As for circuits etc may I refer you to http://www.ukwhitegoods.co.uk/modules.p … pic&t=4361
Greg
Re: You are kidding
Im on water 😆 just been tidying up “Lost your Instruction Manual” posts in public forum.
It livens a night up 😀
Greg
Re: Diplomat APM 8512/01 not working
Hi
For some reason I thought it was a whirlpool 😳
Have adjusted your title accordingly, hope that ok with you 😀Greg
