[gegsy]

Re: OLNY SRMAT POEPLE CAN RAED TIHS

Moved to Off Topic Malt 😉
I can read that, that is weird 😆

Greg

[gegsy]

Re: HELP! Bosch WFF2000 W/M motor not working

stonkin wrote:just done the continuity check…

the connector block shows pin numbers 1 thru 8 (with 1 and 8 pins missing). The only continuous circuit is thru pins 2 & 3, nothing else. 🙁

Thanks for your help anyway.

If Pins 2 and 3 are showing 0.8 – 1.4 ohms then the overload fuse is intact.
There is no connection on pins 1 and 8, so thats correct.
Pins 4-5 should have 1.8 – 10 ohms across them
Pins 6-7 should have 14 – 130 ohms across them

Un plug appliance when attempting these measurements.
Greg

[gegsy]

Re: No Turkey! electrolux ED8 872 shut down for xmas

Hi
Im afraid you are going to have to get a suitably qualified Corgi engineer.
You can try the link below to find one but the chance of getting anyone out now I must say is slim 😥
But you never know, you may get lucky (fingers crossed) 😀

Greg

[gegsy]

Re: Seasons greetings

Merry Christmas Nige, have a good time :tup:

Greg

[gegsy]

Re: Driving standards!

Too painfull 😥

[gegsy]

Re: Driving standards!

I can still give the finger 😆

[gegsy]

Re: Driving standards!

http://www.sirc.org/publik/white_van_man.html

[gegsy]

Re: Cowboys

Hi Ken
I know you wasn’t singling anyone out and I think Boro was making the point that the microwave repair was a basic repair because it was using the standard way of generating the high voltage, compared to the new single pcb electronic method.
I had to drop in Indesit Company for their pure awkwardness and obstructive way they will not freely give tech info to non Indespoint engineers 😈

Greg

[gegsy]

Re: Recommended Listening

My nomination for: –

Best single of 2006 = Sugababes – Push the Button
Best Album of 2006 = Def Leppard – Yeah
Best music video 2006 = Charlotte Church – Moodswings

[gegsy]

Re: Bosch Cooker Hood DUH 10 80 S – DUH 1080 S For Spares

Hi
That model does not exist on system I have whether its because you have a Geman import Im not sure.

Greg

[gegsy]

Re: Bosch WWF2000 filling constantly and making a grinding n

Hi Steve
The safety concerns were not directed solely at you. There will be other persons reading this post (hopefully 😀 ) that may not have the same ability as you or I.

Back to the fault…These newer machines now do only fill slightly below the door glass until the rinse and then you will see water slightly up the glass.

HTH

Greg

[gegsy]

Re: Steve Wright

You ruin all my funnies Mr Conway 😥 😛

[gegsy]

Re: Cowboys

I did 😆 even on Tradeplaces they dont give fak all away.
They must be saving it for there own laptop and software 😕

Greg

[gegsy]

Re: Steve Wright

Dave_Conway wrote:Now, if it was Simon Bates …. 😆

Or his son.. you know Master….. 😆

Greg

[gegsy]

Re: DHL and Their Lifestyle Couriers Grrrrr?

Is Planet of The Apes close Ken 😆
Must say our DHL guy is top notch 😉

Greg

[Author]

Posts