gegsy

Forum Replies Created

Viewing 15 posts - 3,496 through 3,510 (of 6,724 total)
  • Author
    Posts
  • in reply to: Titan shite #197939
    gegsy
    Participant

    Re: Titan shite

    It looks a total tw@t to work on TBH. Will get round to stripping it, just looks like I would have reached retirement age when we got to strip the drum 😆 It may be solid but its no engineer friendly machine.

    Greg

    in reply to: Spam #167943
    gegsy
    Participant

    Re: Spam

    It gets better

    ZlpGZVVZUkhTfV1F 2:79341 xxx devon anal,

    😆 Dave, summet you not telling us 😀
    http://www.ukwhitegoods.co.uk/modules.p … tent&id=49

    Greg

    in reply to: Siemens Siwamat WXB860BY/05 #197927
    gegsy
    Participant

    Re: Siemens Siwamat WXB860BY/05

    Dragan its ok about your English.
    I would guess and go for what I said about the pump. Have you removed filter and checked all hoses to pump for debris?

    Greg

    in reply to: Bosch WFP 3201GB/01 #197981
    gegsy
    Participant

    Re: Bosch WFP 3201GB/01

    I agree. Also check motor and motor plug and loom continuity from motor to module.
    If all that checks out then I would suspect defective module.

    Greg

    in reply to: Spam #167938
    gegsy
    Participant
    in reply to: Roads #197042
    gegsy
    Participant

    Re: Roads

    There must be a money making aspect of its use Im sure in the future :rolls:

    Greg

    in reply to: Siemens Siwamat WXB860BY/05 #197925
    gegsy
    Participant

    Re: Siemens Siwamat XB860

    Yea noticed the Serbian location. English seems good though, but quite welcome to have tech in German or Spanish aswell as English 😆
    I have updated your post heading aswell Dragan to aid others to help you re- model number you PM’d 😉


    Greg

    in reply to: Siemens Siwamat WXB860BY/05 #197923
    gegsy
    Participant

    Re: Siemens Siwamat XB860

    Hi
    Thanks for PM, but can you please answer previous question re – 2 to 3 times in sucession? or 2 or 3 times with a break between washes.

    Regards
    Greg

    in reply to: Titan shite #197935
    gegsy
    Participant

    Re: Titan shite

    Hi Kev
    I have a service manual for the new one if thats any help until they get their act together?

    Greg

    in reply to: Siemens Siwamat WXB860BY/05 #197922
    gegsy
    Participant

    Re: Siemens Siwamat XB860

    Hi
    2 or 3 times in sucession?
    If so it may be the pump jamming due to wear.
    I cannot find that model on the system either, make sure its off the appliance door 🙂

    Greg

    in reply to: Football #175085
    gegsy
    Participant

    Re: Football

    Oh well a wins a win I guess
    Arsenal 1 – Wigan 0.
    Chelsea 1 – Newcastle 0
    Team Pld Pts

    Man Utd 17 44
    Chelsea 17 39
    Arsenal 17 29
    Portsmouth 17 28
    Liverpool 17 28
    Bolton 17 27
    Reading 17 26
    Aston Villa 17 25
    Tottenham 17 25
    Everton 17 24
    Wigan 17 22
    Man City 17 20
    Fulham 17 20
    Newcastle 17 19
    M’brough 17 17
    Sheff Utd 17 17
    Blackburn 16 16
    West Ham 17 14
    Charlton 17 12
    Watford 16 11

    Greg

    in reply to: Football #175083
    gegsy
    Participant

    Re: Football

    Wigan Athletic v Arsenal

    JJB Stadium
    Wednesday, December 13, 2006, 7.45pm

    Wigan Athletic: Kirkland, Wright, Boyce, Hall, Baines, McCulloch, Landzaat, Skoko, Kilbane, Camara, Heskey. Subs: Pollitt, Jackson, Johansson, Cotterill, Todorov.

    Arsenal: Lehmann, Eboue, Djourou, Toure, Clichy, Walcott, Flamini, Julio Baptista, Silva, Ljungberg, Adebayor. Subs: Almunia, Fabregas, Van Persie, Hleb, Hoyte.


    A chance for the Mighty Gooners to go 3rd 😀

    Greg

    in reply to: Bosch WTL6304GB/02 drying light flashing #197836
    gegsy
    Participant

    Re: Bosch WTL6304GB/02 drying light flashing

    Hi
    Sounds like faulty NTC/s or broken cable from them to pcb.
    NTC (R2) sits above the heater unit
    NTC (R3) sits at front in recess below door aperture below grill, (metal probe)
    You will ned to confirm that they are within tolerance aswell as continuity as mentioned before.
    Check email for NTC values 😀

    Greg

    in reply to: w/pool dwf417w #197832
    gegsy
    Participant

    Re: w/pool dwf417w

    Hi
    Sorted 😉

    Greg

    in reply to: No Fan #197604
    gegsy
    Participant

    Re: No Fan

    No probs eeza, hopefully some of the other guys more used to that make will be able to assist you further, sorry.
    They will of course still need a model number, usually on inner wall of salad drawer area.

    Greg

Viewing 15 posts - 3,496 through 3,510 (of 6,724 total)