gegsy

Forum Replies Created

Viewing 15 posts - 3,676 through 3,690 (of 6,724 total)
  • Author
    Posts
  • in reply to: Whirlpool g2p pipe popping out #194677
    gegsy
    Participant

    Re: Whirlpool g2p pipe popping out

    Hi
    Usually changing
    1/ Sieve Cover p/no 481241818337
    2/ Cover p/no 481241818341

    Occasionally you may have to change the uplift pipe p/no 481253029118

    All part are available from spares@ukwhitegoods.co.uk 😀

    Greg

    in reply to: Indesit D62 Problem #194671
    gegsy
    Participant

    Re: Indesit D62 Problem

    Hi
    It sounds like the old classic base full of water mentioned numerous times on here.
    Unplug appliance before attempting to remove water and find leak.

    Greg

    in reply to: Bosch WFF 2001 #194647
    gegsy
    Participant

    Re: Bosch WFF 2001

    Hi
    If it does turn out to be the pump at fault, then look no further than an email to spares@ukwhitegoods.co.uk quoting BS51116 😀
    Unplug appliance if investigating :plug:
    Greg

    in reply to: Bosch WFD 2460 – Unknown Error Code #194637
    gegsy
    Participant

    Re: Bosch WFD 2460 – Unknown Error Code

    Hi Scratch
    Looks like you have drain problem ie taking longer than 6 minutes.
    Check the filter and your drain hose termination for blockage.

    Greg

    in reply to: Bosch WFD 2460 – Unknown Error Code #194633
    gegsy
    Participant

    Re: Bosch WFD 2460 – Unknown Error Code

    Hi scratch
    Do you have a specific combination of lamps that flash so we can aid you further 🙂
    We cannot give out the full fault code sequence due to copyright, sorry.

    Greg

    in reply to: Football #175054
    gegsy
    Participant

    Re: Football

    Southend 😯 thought this was a football forum :rotl:

    Greg

    in reply to: CD or not CD, that is the question. #194546
    gegsy
    Participant

    Re: CD or not CD, that is the question.

    bubs wrote:As the tart said to the vicar “I like something firm in my hands”
    Graeme

    in reply to: Siemens SE25M575GB not drying properly every time #194525
    gegsy
    Participant

    Re: Siemens SE25M575GB not drying properly every time

    Hi
    I definately believe in seperate Rinse aid and salt action.
    This is more critical in certain BSH appliances which have a turbidity /fuzzy logic sensor, where the times of the wash can vary dramatically depending on water quality. The tablet decay has no way of knowing this and there maybe instances where the tablet decays into rinse action when the dishwasher may still be in the wash cycle for the afore mentioned reason.

    Greg

    in reply to: Siemens SE25M575GB not drying properly every time #194523
    gegsy
    Participant

    Re: Siemens SE25M575GB not drying properly every time

    Trilobite wrote:Finish “Classic” Tablets (with RED Powerball); Fairy Activebursts (dissolvable pouches). Both require use of separate rinse-aid, and salt.

    Hi
    The Fairy Active Burst have a built in rinse aid and salt action but may require the use of additional salt and rinse aid in very hard areas. 😀

    Greg

    in reply to: Bosch SGS45EO8 Dishwasher #194615
    gegsy
    Participant

    Re: Bosch SGS45EO8 Dishwasher

    Hi
    In that case its 493323 £62+VAT list 😀

    Greg

    in reply to: “Ooooh Matron” ? #164860
    gegsy
    Participant

    Re: On reflection,

    Thats nowt 😉 http://www.ukwhitegoods.co.uk/modules.p … 286#107286
    Greg

    PS – Ken is answering 😀

    in reply to: Bosch SGS45EO8 Dishwasher #194613
    gegsy
    Participant

    Re: Bosch SGS45EO8 Dishwasher

    timjam wrote:sgs45e08gb I think this is it

    Take yer pick 😉

    SGS45E08GB/45
    SGS45E08GB/52
    SGS45E08GB/56

    Regards
    Greg 😀

    in reply to: Bosch SGS45EO8 Dishwasher #194611
    gegsy
    Participant

    Re: Bosch SGS45EO8 Dishwasher

    Hi
    It certainly sounds like the triac driving the pump on the module has blown.
    If you have the full correct Enr number we can get you a part number 😀

    Greg

    in reply to: Siemens KG34UM90GB eeprom error DM #192241
    gegsy
    Participant

    Re: Siemens KG34UM90GB eeprom error DM

    Hi Tally
    Thanks for getting back and Im glad you are sorted 😀

    Greg

    in reply to: Bosch model number query #194571
    gegsy
    Participant

    Re: Bosch model number query

    Hi Moll
    There may be two reasons that he Bosch website doesnt show the model.
    1/ The website has not been updated and WAE24465 is the new model to replace the WAE24464.
    2/ WAE24465 has been made specifically for Dixons Group, enabling them to be able to say “We Won’t be beaten on price”; as you you wont be able to buy that particular model anywhere else 😈

    Greg

Viewing 15 posts - 3,676 through 3,690 (of 6,724 total)