Forum Replies Created
-
Posts
-
Re: samsung RS21 FCSV freezer not cooling properly
Hi Nicola
this is a very complex machine and I would recommend a professional repairer.
Please feel free to use the link below.Greg
Re: Football
boro wrote:Where is this place you speak of called Mddlesborough? .
Its Middlesbrough 😆 You should know better 😛
Lets go back to Highbury, this Emirates is a bloody jinx for us 😥
Greg
Re: Desperately seeking reliable dishwasher!
Hi
Neff, Bosch,Siemens and Gagganau all belong to the same company (BSH) but all cater for different requirements and use.
As for recycling appliances you could contact these people http://www.createuk.com/Greg
Re: Recommends for a new machine
Hi
Switching off audible signal
With control knob at the 12 o clock position,turn knob one click to the right
and then press “rpm”, keeping rpm pressed, turn knob yet again one click to the right and then release “rpm” button. Audible signal should be OFF now 😉Greg
Re: Football
iadom wrote:Rooney & Scholes back for next game against a team already looking like relegation candidates. 😉 😆
I don’t think they will be relegated but as per will wake up slightly half way through season and come in the top 5 :rolls:
Man U v Arsenal mmmm Arsenal to win 1 – 0 as they may just wake up and smell the prem going down pan as usual 👿
Greg
Re: Football
Arsenal v Middlesborough
Full time !! 1 – 1
Arsenal – Henry 67 (pen)
Middlesbrough – Morrison 21
Good game but another crap performance from Arsenal :rolls:
Greg
Re: B1542N0GB/01 Neff fan oven knobs stuck in/ misaligned
Hi
Definately user error.
They must have turned the dials the wrong way and the knob mechanism has jumped out of its correct position.
With some perseverance and a small screwdriver you can flick it back into alignment.
All done from the inside.
Failing that, you could buy new knobs but waste of money IMO.Greg
Re: Football
Arsenal v Middlesborough
Barclays Premiership
Emirates Stadium
Saturday, September 09, 2006, 3pmGood luck Boro :tup:
Re: Bosch WFL245SGB/04 Does not spin
Hi Terry
If you are profficient in the use of a multimeter, you could check the motor pin resistances.Between:-
Pin 2 and 3…. 0.8 ohms – 2 ohms
Pin 4 and 5…. 4 ohms – 10 ohms
Pin 6 and 7…. 14 ohms – 240 ohms:lesson: Please note these readings will be obtained with the appliance unplugged :plug:
If that checks out the wiring from motor to module for continuity.
If in any doubts, please feel free to use the engineer link below.Greg
Re: Bosch WFL245SGB/04 Does not spin
Hi Terry
More than likely motor brushes. Unplug appliance and remove and check the length.
Should be approx 1.5 inch in length when new FYI
You will need to take motor off to gain access and please note make of motor as there are two motors on this appliance and will need this to obtain correct brushes.Greg
We use it for Neff,Bosch and Siemens.
When you subscribe, you only have access to that particular make 🙂
It used to be slow but has got better, broadband is a must though 😉
We order directly off diagrams on same log in and site, very handy.
GregRe: neff oven “challenge”
Hi Wheezer
Im sorry to hear about your problem, but I must refer you to Professional Advice in the Public Forums at the top of the forum, specifically No 8.If you need an engineer please feel free to use the link below to find one.
Greg
