gegsy

Forum Replies Created

Viewing 15 posts - 4,321 through 4,335 (of 6,724 total)
1 2 3 … 288 289 290 … 447 448 449
  • Author
    Posts
  • September 1, 2006 at 8:35 am in reply to: Cold Calls #187124
    gegsy
    Participant

    Re: Cold Calls

    Oh bugger 👿

    Greg 😀

    September 1, 2006 at 8:34 am in reply to: BOSCH WFR 2460 MOTOR PROBLEM #187150
    gegsy
    Participant

    Re: BOSCH WFR 2460 MOTOR PROBLEM

    Hi nubian
    Its far easier removing the motor.
    With the appliance unplugged :plug: of course.
    If you should require brushes which it certainly sounds like, look no further than here http://tinyurl.com/furgj 😉
    If you should require an engineer please follow the link below on my signature.

    Greg

    August 31, 2006 at 10:20 pm in reply to: Cold Calls #187121
    gegsy
    Participant

    Re: Cold Calls

    I zee iz it zee flashin knobs Rene 😆

    “In my bog I have a kack.”
    – (Crabtree attempts to explain that in his bag he has a cake.)


    Greg

    August 31, 2006 at 10:06 pm in reply to: Cold Calls #187119
    gegsy
    Participant

    Re: Cold Calls

    Hi Jim,
    You can get free caller ID now from BT. If a call is coming in from outside the UK it desplays “International” so you can reject it 😀

    Greg

    August 31, 2006 at 9:14 pm in reply to: bosch w/m wff 1401 #187154
    gegsy
    Participant

    Re: bosch w/m wff 1401

    Numerous things Ally can make it go round to pump then finish.
    Check your email 😉

    Greg

    August 31, 2006 at 8:57 pm in reply to: siemens d/w se25m570 #187155
    gegsy
    Participant

    Re: siemens d/w se25m570

    Hi Ally
    I would start with the 1 foot ribbed hose at the front joining the metering unit to the sump. Remove it and clean. 😉

    Greg

    August 31, 2006 at 6:46 pm in reply to: Cold Calls #187115
    gegsy
    Participant

    Re: Cold Calls

    What you do with them Chris is get music and leave receiver there for 20 mins or so whilst you go and do something more interesting 😆
    Do you get crap down your fax aswel?? wasting expensive ink :rolls:

    Greg

    August 31, 2006 at 5:26 pm in reply to: Bosch WFP3201GB/01 door locked #186868
    gegsy
    Participant

    Re: Bosch WFP3201GB/01 door locked

    I don’t know if they are interchangeable and Boro hasn’t posted to confirm so next step would be BSH.
    Thats all I meant. 🙂
    Greg

    August 31, 2006 at 8:54 am in reply to: By chance #187058
    gegsy
    Participant

    Re: By chance

    SWERV wrote:Typical connect show the hotpoint one at 37.09 + vat to me, but we won’t start on that topic again, otherwise we’ll be here all day.
    Merv

    :rolls: yep typical

    Greg

    August 31, 2006 at 8:46 am in reply to: By chance #187056
    gegsy
    Participant

    Re: By chance

    Penguin45 wrote:Bosch one’s under £14! 😀
    Chris.

    Yup and Connect show the Hotpoint one around £31 😯

    Greg

    August 31, 2006 at 8:35 am in reply to: Bosch WFP3201GB/01 door locked #186866
    gegsy
    Participant

    Re: Bosch WFP3201GB/01 door locked

    Hi
    Martin or Bryan, you could always ring BSH technical and ask them about the end caps as Im sure they will oblige 😉

    Greg

    August 30, 2006 at 9:48 pm in reply to: cheap parts #187007
    gegsy
    Participant

    Re: wiring diagrams for eletronics

    Hi zanussi
    Please refer to http://www.ukwhitegoods.co.uk/modules.p … pic&t=4361 paragraph 8.

    Greg

    August 30, 2006 at 9:24 pm in reply to: diplomat ADP8322 tripping rcd. #186655
    gegsy
    Participant

    Re: diplomat ADP8322 tripping rcd.

    Hi dougie
    Its saying a drain fault or level detection fault ie water indicator clogged/faulty or at worse PCB fault.
    Check that filters are clean and that the WI below filter at 3 o clock position (round ish and black with grills) isn’t gunged up 😉

    Greg

    August 30, 2006 at 9:10 pm in reply to: “Ooooh Matron” ? #164746
    gegsy
    Participant

    Re: Anguis in herba

    I don’t know what to make of Ken_W 😕 It seems a game to him 😕

    Greg

    August 30, 2006 at 9:03 pm in reply to: Siemens SN53204GB/15 #186996
    gegsy
    Participant

    Re: Siemens SN53204GB/15

    I sure did Mr P, not one to brag 8)

    Greg

  • Author
    Posts
Viewing 15 posts - 4,321 through 4,335 (of 6,724 total)
1 2 3 … 288 289 290 … 447 448 449