gegsy

Forum Replies Created

Viewing 15 posts - 4,306 through 4,320 (of 6,724 total)
  • Author
    Posts
  • in reply to: Bosch WTA3204GB/09 FD 8310. #187281
    gegsy
    Participant

    Re: Bosch WTA3204GB/09 FD 8310.

    Hi Chris,
    For the a more indepth diagnosis, you have email 😉

    Greg

    in reply to: Bosch WTA3204GB/09 FD 8310. #187280
    gegsy
    Participant

    Re: Bosch WTA3204GB/09 FD 8310.

    Hi Chris

    Have a go at these aswell, unless you already done 😀

    1/ Lint filter clogged with fatty deposits over a bulid up over a period of time. (Run tap water over it and see if it flows through the media)
    2/ Check rear fan for slackness
    3/ The carbon brush sensors for good contact on drum and feed back to PCB.
    4/ Sufficient loading to enable correct sensing of dry time required.

    HTH
    Greg

    in reply to: Football #175006
    gegsy
    Participant

    Re: Football

    Another “canny”, if I may use your saying Don; is the excellent signing of William Gallas for Arsenal and the off loading to Chelsea of Ashley Cole 😀 :tup:
    http://tinyurl.com/goyku

    Greg

    in reply to: Problem with Siemens Fridge #185814
    gegsy
    Participant

    Re: Problem with Siemens Fridge

    Hi
    They are all situated on the inside right hand side of cavity.
    Only the last model in that range has a possible electronic temperature regulator, namely KI18R03GB/03.
    Although it still could be a compressor related fault 😕
    Greg

    in reply to: Plz help! I’m a washing machine newbie! #187250
    gegsy
    Participant

    Re: Plz help! I’m a washing machine newbie!

    Hi WM
    Just to try and eliminate certain “known suspects” that may cause your leaking.
    1/ High water pressure to appliance, where the conditioner compartment mainly cannot cope with the amount of water delivered.
    2/ Hair/fibre debris and slight scum build up between the contact of door seal and door bowl glass.
    3/ The use of existing and sometimes perished old fill hose/s or not sufficiently tightened new fill hoses.

    HTH

    Greg

    in reply to: BOSCH WT5500GB/01 Tumble Dryer #187147
    gegsy
    Participant

    Re: BOSCH WT5500GB/01 Tumble Dryer

    You have mail 😉
    Greg

    in reply to: Whirlpool AWM336…needs new pump I think #187245
    gegsy
    Participant

    Re: Whirlpool AWM336…needs new pump I think

    Hi Nick
    Sounds like a possible blockage in the fill pressure system and/or timer problem.
    Without being hands on its hard to tell 😕
    You may want to consider an engineer. Please use the link below to find one.

    Regards

    Greg

    in reply to: Whirlpool AWM336…needs new pump I think #187243
    gegsy
    Participant

    Re: Whirlpool AWM336…needs new pump I think

    Hi Nick
    It could be faulty fill valve,heater or thermostat also. Pump if required is around the £53.
    In what way does it stick ie- what can you see and hear?
    Un plug appliance if you are going to fault any further :plug:

    Greg

    in reply to: ariston knob #187242
    gegsy
    Participant

    Re: ariston knob

    Hi
    Connect are showing part as MER040319; no mention of obsoletion. 😀

    Greg

    in reply to: Smeg Dishwasher DW 1710E1 #187220
    gegsy
    Participant

    Re: Smeg Dishwasher DW 1710E1

    Hi Albar
    May I refer you to Professional Advice in the Public Forums paragraph 8; at the top of the forum 🙂
    Regards

    Greg

    in reply to: SCHULTHESS Spirit 6155 no action #187200
    gegsy
    Participant

    Re: SCHULTHESS Spirit 6155 no action

    Hi
    Link to their website http://tinyurl.com/nqta3 looks good stuff 🙂

    Greg

    in reply to: W/POOL T/D #187215
    gegsy
    Participant

    Re: W/POOL T/D

    Hya Ally
    All 3 models use the same heater 481231018628.

    Greg

    in reply to: BOSCH WT5500GB/01 Tumble Dryer #187145
    gegsy
    Participant

    Re: BOSCH WT5500GB/01 Tumble Dryer

    Hi Mike
    You may want to re check that model number 😉

    Greg

    in reply to: Cold Calls #187128
    gegsy
    Participant

    Re: Cold Calls

    Alex wrote:No pensioners were intentionally hurt or distressed by the makers of this programme. Must go now, time for my afternoon nap.
    Alex

    :rotl:

    in reply to: BOSCH WFR 2460 MOTOR PROBLEM #187152
    gegsy
    Participant

    Re: BOSCH WFR 2460 MOTOR PROBLEM

    Hi Martin :waving:

Viewing 15 posts - 4,306 through 4,320 (of 6,724 total)