gegsy

Forum Replies Created

Viewing 15 posts - 946 through 960 (of 6,724 total)
  • Author
    Posts
  • in reply to: FA Cup #238629
    gegsy
    Participant

    Re: FA Cup

    Yea tell me and don’t let Martin do it , he will delete all my posts 😆
    Had to console myself and watch my Arsenal DVDs over weekend, I may never be the same
    The 49 Unbeaten was good until match 50 damn you UTD 😥
    Bergkamp testemonial made me happier seeing Mr Wright and Mr Henry playing together 😀
    Greg

    in reply to: UKW 2.0 #224332
    gegsy
    Participant

    Re: UKW 2.0

    When he dies he will go Talisker heaven 😉

    Greg

    On a serious note, nice one 😀

    in reply to: Bosch Dishwasher SGS43A22GB stops mid cycle!?! #242767
    gegsy
    Participant

    Re: Bosch Dishwasher SGS43A22GB stops mid cycle!?!

    mr rugby wrote:……..When they fail they usually split or leak.

    Yea they can but sometimes even when checked with suitable meter they read ok but under load they can breakdown. 😀

    Greg

    in reply to: Siemens no fast spin? #243353
    gegsy
    Participant

    Re: Siemens no fast spin?

    IIRC its always a reduced spin on “Spin Only” and obviously at the end of the more delicate washes (regardless of spin speed selection)aswell 😉

    Greg

    in reply to: UKW 2.0 #224327
    gegsy
    Participant

    Re: UKW 2.0

    Looking nice K, I don’t know where you get the time? Are you a timelord 😆

    Greg

    in reply to: Bosch Dishwasher SGS43A22GB stops mid cycle!?! #242762
    gegsy
    Participant

    Re: Bosch Dishwasher SGS43A22GB stops mid cycle!?!

    Cheapest option is change the capacitor, its the most likely and most inexpensive 😉

    Greg

    in reply to: neff b1691n0gb/01 #243457
    gegsy
    Participant

    Re: neff b1691n0gb/01

    I have no tech on that appliance sorry 😥
    Maybe superfix or BSh-Man may have some idea.
    Hopefully its not showing BER 😉

    Greg

    in reply to: Siemens no fast spin? #243351
    gegsy
    Participant

    Re: Siemens no fast spin?

    As for Spin only, yes it is a reduced spin probably 800 – 900rpm 😕

    in reply to: FA Cup #238626
    gegsy
    Participant

    Re: FA Cup

    Gallas should have been red imho, you know what they say……….. you can take the player out of Chelski 😆

    Greg

    in reply to: NEFF S5443X1GB/17 DISHWASHER #243440
    gegsy
    Participant

    Re: NEFF S5443X1GB/17 DISHWASHER

    Try RS or Maplin and use a low wattage iron like an Antex 15W 😉

    Greg

    in reply to: FA Cup #238624
    gegsy
    Participant

    Re: FA Cup

    What a god awful performance by Arsenal 👿
    Well done UTD you desrved that win and more goals if Im honest 👿

    Greg

    in reply to: FA Cup #238622
    gegsy
    Participant

    Re: FA Cup

    Just 😆

    in reply to: FA Cup #238620
    gegsy
    Participant

    Re: FA Cup

    Absolutely, as long as its a skillfull,cardless and flowing game I will be happy.

    Man Utd (from): Van der Sar, Kuszczak, Brown, O’Shea, Simpson, Ferdinand, Vidic, Evra, Fletcher, Nani, Park, Scholes, Ronaldo, Anderson, Carrick, Hargreaves, Giggs, Tevez, Rooney, Saha, Welbeck.

    Arsenal (from): Lehmann, Fabianski, Senderos, Hleb, Fabregas, Flamini, Adebayor, Eduardo, Bendtner, Traore, Song, J Hoyte, Gilberto, Gilbert, G Hoyte, Lansbury.

    Manchester United have Wayne Rooney and Patrice Evra back after suspension.
    Striker Louis Saha is available after a knee injury after but right-back Gary Neville and left-back Mikael Silvestre remain sidelined.
    Arsenal defenders Kolo Toure and Emmanuel Eboue are available after their Africa Cup of Nations stint.
    But Theo Walcott (thigh), Gael Clichy (hamstring) and Bacary Sagna (personal reasons) are set to miss out, while Philippe Senderos (knee) is a doubt.

    Greg

    in reply to: FA Cup #238618
    gegsy
    Participant

    Re: FA Cup

    Manchester United v Arsenal

    FA Cup Round 5
    Old Trafford
    Saturday, February 16, 2008, 5.15pm

    Can’t wait, its going to be a cracker

    I predict Man United 1 – Arsenal 2 8) 😉

    (In the right forum now thanks Jim 😳 )

    in reply to: NEFF S5443X1GB/17 DISHWASHER #243438
    gegsy
    Participant

    Re: NEFF S5443X1GB/17 DISHWASHER

    Hi
    Like you said, it may be triac, I would say you are on the money there 😉 If you are handy with a soldering iron you can component change the errant component. 😀
    See email ❗

    Greg

Viewing 15 posts - 946 through 960 (of 6,724 total)