[gegsy]

Re: QED ?

Agreed. As much as I appreciate the situation UKW is not the vehicle to convey the situation 😕

Greg

[gegsy]

Re: Recommended Listening

You wont go far wrong with
Carole King,Duffy (local to me boyo), Kate Rusby (local to Penguin eyy up) and Blondie 😀

Greg

[gegsy]

Re: Siemens Vs Miele: Help Buying Please

Hi
Don is the man for this really 😀
IMHO Siemens are good machines and some come with 5 year guarantee 😉

Miele are the best but have pricey spares when out of warranty.

HTH

Greg

[gegsy]

Re: long cycle times on Bosch S9F1B

Check the drain connection ie is it backflowing from sink etc, and if you could get the full model number off the appliance itself that would be great 😀

Greg

[gegsy]

Re: NEFF U1721NOGB Element keeps blowing

Just to add, was a genuine element, namely part number 494643 fitted?

Greg

[gegsy]

Re: Whirlpool 4501/5 nothing seems to clear code 4 or 11

Hi
Need full model off appliance or 12 digits below barcode on appliance 😀 .

Greg

[gegsy]

Re: BOSCH DISHWASHER SGS43A22GB01 OVERFILLS

On this one Im sure you can’t fill ontop of a fill as the float would rise and shut off when at correct fill level.
Moslt likely sticking float (PITA they were) or customer watched you and tried to clean float travel and put float back in upside down 😕 😀
Yours is one of the first of this range and most probably will need the “kit”.
Module 489492 £67.40 + VAT and the safety sytem (mushroom float unit) 489542 £5.06 + VAT
Worth checking is that the float isn’t taking in water also 😉
Im sure some other Bosch guys will confirm please 😀

Greg

[gegsy]

Re: Bosch WTA3204GB/09 Dryer, no heat

Hi
It would turn for at least 2 mins before aborting with no damp load or drum sensor fault as Martin said 😀
Make sure the airflow circuit is clear and filter is clear 😀
Heater is only activated when the drum turns in a clockwise direction and when working temp is reached on one NTC, it will turn off the heater for 2 mins.
IMHO I would say NTC/S out of tolerance, turning heater off too soon if airflow as above is ok.

Greg

[gegsy]

Re: Bosch micowave F8 fault

Model would be handy please 😀

Greg

[gegsy]

Re: Bosch cycle vs heating question

Hi
IIRC it does only heat just after 4 and later on for the drying section 😀

Greg

[gegsy]

Re: Neff U1442NOGB. FD8606 double oven

Hi
They can be a pain but I tend to use pipe pliers to fit around cover to grip two of the nibs, then twist.
Care to be taken not to squeeze too hard and cause damage. I would wear safety goggles and gloves just incase 😉

Greg

[gegsy]

Re: FA Cup

iadom wrote:But Arsenal are already out. 😆

:whip: 😆

Greg

[gegsy]

Re: low salt indicator light “stuck” on

Might want to re-check that model number 😉
Better still get the numbers below the barcode 😀

Greg

[gegsy]

Re: Siemens SE65E330GB

Hi Lawrence
1/ Insufficient fill (Check the transfer tube,metering unit and water matrix for crud)
2/ Micro sw on heater u/s
3/ Stat on heater box
4/ Heater
5/ Module

HTH

Greg

[gegsy]

Re: request from a stranger …

Hya Rob
You are certainly no stranger 😀
Wait till dal sees this , it will makes his weekend 😆

Greg

[Author]

Posts