giley

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: Freezer cold Fridge not #173769
    giley
    Participant

    Re: Freezer cold Fridge not

    Sorry Dave, meant to say that the motor is constantly running – disctracted by my children.

    giles

    in reply to: Freezer cold Fridge not #173768
    giley
    Participant

    Re: Freezer cold Fridge not

    Sorry – motor seems to be running smoothly

    in reply to: Freezer cold Fridge not #173766
    giley
    Participant

    Re: Freezer cold Fridge not

    Hi – thanks Dave.
    The motor seems to be running smoothly, freezer still freezing.

    Giles

    in reply to: Indesit washing machine Belt #159431
    giley
    Participant

    Re: Indesit washing machine Belt

    thanks for your help. assuming the drainage is OK and that the belt is correct, is it fixable??

    giles

    in reply to: Indesit washing machine Belt #159429
    giley
    Participant

    Re: Indesit washing machine Belt

    Hi guys,
    checked motor mountings which seem to be sturdy, also made sure machine was rebalanced when trying again to spin it – am still scratching my head. are all washing machines temperamental? g

    in reply to: Indesit washing machine Belt #159427
    giley
    Participant

    Re: Indesit washing machine Belt

    Hi again – checked filter which was not too bad – bearings also seem fine, in that the drum is fairly solid and quiet. new belt also seemed OK in that it was just a wee bit tighter than the old, but still came off at the spin stage – noise not excessive or too unusual. Still puzzled…?

    in reply to: Indesit washing machine Belt #159425
    giley
    Participant

    Re: Indesit washing machine Belt

    Hi – belt was from Indesit so should have been OK. The model is a W123 UK BG. My wife thinks it used to make a louder noise when it started spinning just before belt came off, so may have been a bearings failure – is that a big problem and how would I be able to verify before getting anyone out? Ta

Viewing 7 posts - 1 through 7 (of 7 total)