[GillM]

Re: Dead D/W No 2!!! Brandt error code d07

Well, thanks to Jonah one Brandt dishwasher is back in use and still working beautifully!! Thanks so much!
Still no sign of the first engineer who I booked 11 months ago to view the faulty indesit D/W, nor the second engineer who promised faithfully to come out in early January and now seems to have gone AWOL. Customer service really does not exist out here!

Any UK engineers planning a holiday in Brittany? 😆 😆 😆

[GillM]

Re: Dead D/W No 2!!! Brandt error code d07

😀 😀 I can put the Fairy liquid away!!

Well, after the draining of the base, it is now working again. It has been used once and went fine. So, now all I need to do is keep an eye on it and see if it fills again! (at least I now know that the anti-flooding mechanism works! 😆 😆 )
Thank you so much for your very helpful advice.

😉 I wonder if the Indesit would fit in the back of the van next time I come over to visit the brother-in-law in Cornwall, Jonah ………..?

[GillM]

Re: Dead D/W No 2!!! Brandt error code d07

👿
Jonah, the main problem here are the shops – you would think you are asking them to pay for the repair out of their own pockets!
I returned a 3 month old HP printer to Carrefour with a problem. They wouldn’t replace but said ‘it will be repaired’.
4 months later, I managed to get it back – untouched!
It was returned to me again, after much chasing, 5 months later, still not working with the response that it was not under guarantee any more!

👿 👿

[GillM]

Re: Idesit IDL40 Flashing light help

I bought a new Indesit IDL41 2yrs ago and within 6 months that also died – no error message but a base full of water – and has never worked since!
During this period it had been used only around 10 times. I wonder if this fault is pre-programmed at the factory! 👿

[GillM]

Re: Dead D/W No 2!!! Brandt error code d07

Thanks so much for taking the time to reply. Actually this morning, my husband pulled out the machine and I have now finished mopping the floor!
I am feeling rather disgruntled with white goods at present due to constant breakdowns. The other dead machine is an Indesit IDL 41 which packed up after 6 months of purchase and around 10 uses during this period! This was bought here in France where their customer service motto is caveat emptor! :rolls:
If / when I have to buy replacements can you please suggest a brand with a good reputation?
I shall be buying in the UK and exporting it this time due to lower prices over there.

[GillM]

Re: Zanussi ZOD690X double oven – How many KW pls?

Many thanks everyone for your kind advice, especially Jim who very kindly sent me documents via email!.

I have now found out that the Zanussi oven is 5.3kw, and (thanks to Don) that the hob unit is 7.1, making a total of 12.4kw if they are both switched on together.
So our client has a 5 bed holiday home over here with an incoming (single phase) supply of 9kw, from which he’s going to run a water heater, electric kettle, 9.5kw electric shower, washing machine (cold fill), tumble dryer etc, etc in addition to the above ……? 😯

I think he needs a rethink …….. 😆
Thanks so much for all your advice, it’s really appreciated and will save our client a lot of problems with blown main incoming fuses!

[GillM]

Re: Zanussi ZOD690X double oven – How many KW pls?

The problem is that they are still in their original boxes and still in the UK. They are/were to be fitted into the new kitchen of their holiday home here in Brittany next month.
The customer is here in France and the appliances are in Portsmouth……

[GillM]

Re: Zanussi ZOD690X double oven – How many KW pls?

Thanks for checking this out, I really do appreciate it – is there any additional information I can provide for you to make it easier? I’ve checked everywhere I could think of on the WWW but without any luck!

[Author]

Posts