giveitago616

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: fan motor not working properly #493809
    giveitago616
    Participant

    electrofix wrote: ok cant be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain without serial no and commercial code off label but there are 3 cookers with model numbers starting KD533A

    they all use the same fan motor but as said can never be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} without an accurate serial no

    fan motor part no 264440193

    Dave

    Brill, thanks for the quick reply. just found the full model code off the bottom front of the oven, it ends in a k, so its kd533ak

    in reply to: Russell Hobbs RH8CTD701 belt replacement advice #489542
    giveitago616
    Participant

    All fixed! Thanks all, yes Dave, had to take the motor out to slide the belt under. The brackets on the motor are a bit fiddly to get to, but all done now, and seems to be running okay. Drying a lot better as well it seems, gave it a good clean out. Its amazing how far all the fluff gets over time.
    Thanks again,
    Lee

    in reply to: Russell Hobbs RH8CTD701 belt replacement advice #489541
    giveitago616
    Participant

    Brill, thank you. I’ll give it a go if the belt turns up. Seems royal mail have it, but they’re a bit slow delivering!

Viewing 3 posts - 1 through 3 (of 3 total)