grip

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: Smeg Washing Machine WDI12C #223616
    grip
    Participant

    Re: Smeg Washing Machine WDI12C

    yes, when it turns it does seem more violent than usual

    in reply to: power trip on zanussi WJS1665W #213769
    grip
    Participant

    Re: power trip on zanussi WJS1665W

    Well….got an engineer out to look at it and apparently its the motor that has gone!!!….so is it worth replacing or are we talking new machine?…

    in reply to: power trip on zanussi WJS1665W #213767
    grip
    Participant

    Re: power trip on zanussi WJS1665W

    If the machine does not work after fitting the new door lock then i can only assume the pcb board has a fault or has blown…am i right
    I dont want to get one and find its not at fault or could it be something else….is there any way of testing the machine, i know you can put it into diagnostic mode but would this tell me what has gone wrong…thanks

    in reply to: power trip on zanussi WJS1665W #213766
    grip
    Participant

    Re: power trip on zanussi WJS1665W

    Well i fitted the new door lock but i still get an earth trip at the fuse board. Any other ideas??? I have tried everything right up until i shut the door and then it trips, even tried with the door open and i can hear the door lock clicking so it is working.

    Any help would be great as our young kids clothes are starting to stink! 😛

    in reply to: power trip on zanussi WJS1665W #213763
    grip
    Participant

    Re: power trip on zanussi WJS1665W

    I was able to check the wires but nothing seemed adrift, once i got the door open everything seemed fine, switched it on and no power trip…great…but as soon as i shut the door the power trips.

    The red light briefly comes on next to the door lock and then trips so could this be the safety lock on the door or something internal connected to the door…any help would be great thanks 😕

Viewing 5 posts - 1 through 5 (of 5 total)